Simrad AP48 Autopilot Control Head w/Rotary Knob

Set up a dedicated Simrad autopilot command point with the Simrad AP48 Autopilot Control Head, which combines a 4.1-inch color display, aluminum rotary dial, and dedicated dodge controls. The unit connects through a 12V NMEA 2000 network and supports compatible NAC-2, NAC-3, AC12, and AC42 autopilot computers. Its 177 mm by 115 mm flush-mount profile should be checked against the available helm-panel space and rear clearance.

A 360-degree continuous rotary dial supports the stated heading-control interface, while the controller draws about 1.4W during typical operation. The IPX7-rated housing operates from minus 15°C to 55°C and weighs 0.5 kg, or 1.1 lb. Included components consist of a bezel, sun cover, and NMEA 2000 T-connector. A compatible Simrad autopilot computer, drive, compass, and network remain required for a complete installation.

Why Choose the Simrad AP48 Autopilot Control Head

The Simrad AP48 Autopilot Control Head provides a 4.1-inch color display, larger aluminum rotary dial, dedicated dodge controls, NMEA 2000 connection, and IPX7-rated flush-mount housing. Its 177 mm by 115 mm size, 12V network supply, 1.4W typical draw, and compatibility with NAC-2, NAC-3, AC12, and AC42 computers give buyers specific integration checks when adding a helm autopilot controller.

Warranty and Support

Simrad warranty terms vary by product and region, and the supplied specifications do not provide a named warranty period for the AP48 controller. can help you review flush-mount dimensions, NMEA 2000 network needs, autopilot-computer compatibility, display placement, and required processor, drive, and compass components before purchase. Review the applicable Simrad warranty coverage and documented package contents before ordering.

Before Ordering the Simrad AP48 Autopilot Control Head

Confirm that you need an autopilot control head and already have, or plan to install, a compatible Simrad autopilot computer, drive, heading sensor, and NMEA 2000 backbone. You should verify the 177 mm by 115 mm flush-mount space, rear clearance, 12V network supply, cable route, control-head location, and the NAC-2, NAC-3, AC12, or AC42 computer used by your system.