VETUS M2.13 – Marine Diesel Engine 12 HP

At 12 hp and 3000 rpm, the VETUS M2.13 is an inline two-cylinder marine diesel engine with 0.64 L displacement. This naturally aspirated Mitsubishi-based engine uses indirect injection and specifies EN 590 diesel. Its Technodrive TMC40 transmission compatibility and available 2:1, 2.4:1, and 3:1 ratios provide defined drivetrain options for a shaft-drive inboard propulsion installation.

Indirect cooling through a heat exchanger works with a 40 mm water-injected wet exhaust. The engine has a 12V, 75-amp alternator, a modified SAE 5 flywheel housing, and a listed dry weight of 98 kg. A 2.2 L coolant capacity and 3.1 L oil capacity should be considered when planning service access and routine fluid maintenance.

Why Choose the VETUS M2.13 Marine Diesel Engine

The M2.13 marine diesel engine is rated at 12 hp and 3000 rpm in a naturally aspirated 0.64 L inline two-cylinder arrangement. Buyers can evaluate its 98 kg listed dry weight, modified SAE 5 flywheel housing, Technodrive TMC40 transmission compatibility, three reduction-ratio choices, 75-amp alternator, heat-exchanger cooling, and 40 mm wet exhaust. These technical details define the engine’s stated mechanical and installation configuration.

Warranty and Support

VETUS provides its 5 PLUS engine warranty program, consisting of 36 months of coverage for material and construction defects for eligible non-commercial pleasure-craft use, plus a subsequent 24-month limited coverage period for specified engine parts, subject to applicable operating-hour limits and warranty conditions. For product details and order support, offers assistance before your purchase is placed. Current coverage information and warranty eligibility are available for review on before ordering.

Before Ordering the VETUS M2.13 Marine Diesel Engine

Confirm that you need the stated 12 hp at 3000 rpm output, 0.64 L two-cylinder arrangement, modified SAE 5 flywheel housing, and Technodrive TMC40 transmission. You should select the suitable 2:1, 2.4:1, or 3:1 ratio, verify 98 kg engine-bed support, and plan the propeller shaft, EN 590 fuel supply, cooling, 40 mm wet-exhaust, steering, and 12V electrical connections.