CTM Marine EV-10 10000 BTU Split A/C Evaporator 115V
CTM Marine EV-10 supplies 10,000 BTU evaporator capacity from 115V power for compatible marine split air conditioning installations.
- 10,000 BTU capacity targets smaller cabins.
- 115V supply suits compatible systems.
- Evaporator transfers interior heat.
- Split A/C requires matched hardware.
- EV-10 identifies the model.
$541.45
Availability
In stock and available to order
Bulk order support
Request for Quotation
Free standard shipping to eligible destinationsSecure checkout
Standard 115V shore power gets a 10,000 BTU air handler in the CTM EV-10, built as a direct drop-in replacement for the Dometic TVE evaporator on boats running the most common US electrical setup. It pairs with CTM’s CX-10N condenser to complete a full split-system installation.
Why Choose the CTM EV-10 (115V)
This evaporator carries CTM’s standard 2-year warranty against material and workmanship defects, and current draw is minor compared to any matching condenser since only the blower motor pulls power. Given the specification overlap with the EV-12 listing noted above, confirming exact numbers with CTM before ordering is worthwhile if precise sizing matters for your installation.
What to Know Before Installing
- Requires a matching condenser purchased separately — this listing is the evaporator only
- Confirm published specifications directly with CTM given the data overlap with the EV-12 listing noted above
- 5″ blower duct connects to your cabin’s ductwork
- The reusable air filter should be cleaned periodically as part of routine maintenance
Product Specifications
Product Specifications
| Brand | CTM Marine |
|---|---|
| Full Model SKU/Code | EV-10-115V (EV Series Air Handler) |
| Country of Origin | USA |
| AC System Type | Split-System Marine Air Handler / Evaporator Unit (Requires Remote Condenser) |
| Cooling Capacity | 10,000 BTU/h (2.93 kW) |
| Operating Voltage / Frequency | 115 Volts AC / 60 Hz Single Phase Base Rail |
| Full Load Amps / Running Current | Blower Fan Current Only: 1.1 Amps at 115V Input Cycle |
| Recommended Circuit Breaker Rating | Fused directly via master condensing unit loop terminal block |
| Duct Display / Air Discharge Size | 4.0" (102mm) High-Velocity Multi-Directional Blower Collar |
| Control Interface Connectivity | RJ12 Data Cable Terminal (Tethers directly to master CX series network controller card) |
| Dimensions (L x W x H) | 33.5 cm x 26.5 cm x 26.5 cm / 13.2" x 10.4" x 10.4" |
| Dry Weight | 6.1 kg / 13.5 lbs (Built on rot-proof ABS condensation base pan with high-performance copper/aluminum coil) |
| Application | In-room air delivery for North American standard guest berths, mid-size cabins, and lower deck staterooms running off a localized 115V distribution grid (24-36 ft boat lengths) |
Related Products
Payment Protection
Checkout will use the selected PayPal or Stripe payment method.
Free International Shipping
Free standard delivery to the United States, Canada and Australia.
Product Support
Ask for product and compatibility information before ordering.
Reviews
There are no reviews yet.