Garmin Reactor 40 Steer-By-Wire Corepack f/Yamaha Helm Master w/GHC 50 Autopilot Instrument
Eliminating physical rudder feedback linkages on modern outboards, this Garmin Reactor 40 heading computer commands Yamaha Helm Master and Helm Master EX steer-by-wire networks through dedicated gateways with 9-axis AHRS course tracking.
- Direct CAN-bus gateway integrates Yamaha Helm Master
- Virtual rudder algorithm eliminates mechanical sensors
- 9-axis AHRS prevents course hunting in swells
- GHC 50 touchscreen delivers responsive control inputs
- IPX7 waterproof casing protects console electronics
$1,993.25
Availability
In stock and available to order
Bulk order support
Request for Quotation
Free standard shipping to eligible destinationsSecure checkout
Match a compatible Yamaha Helm Master system with the Garmin Reactor 40 Steer-By-Wire Corepack for Yamaha Helm Master with GHC 50. This corepack includes a Reactor 40 autopilot, Autopilot Gateway, and GHC 50 control display for the specified Yamaha Helm Master system. A 9-axis solid-state AHRS forms the autopilot sensor architecture, while the GHC 50 uses a 5-inch touchscreen for onboard configuration and control. [158]
The system operates from 10V to 30V DC and connects through NMEA 2000 with the Yamaha gateway. Flush and bracket mounting are specified for the GHC 50, which measures 5.5 x 4.1 x 2.0 inches. The display carries an IPX7 rating and an operating temperature range of minus 15°C to 55°C. Compatibility should be checked against the installed Yamaha Helm Master system because Garmin specifies that this corepack is not compatible with Helm Master EX. [158]
Why Choose the Garmin Reactor 40 Yamaha Helm Master Steer-By-Wire Corepack
The Garmin Reactor 40 Yamaha Helm Master Steer-By-Wire Corepack combines a 9-axis AHRS, GHC 50 touchscreen, Autopilot Gateway, NMEA 2000 connection, Yamaha gateway, 10V to 30V DC operating range, and flush or bracket mounting. Buyers can compare its system-specific Yamaha Helm Master compatibility, stated exclusion of Helm Master EX, virtual rudder feedback, IPX7 display rating, and operating-temperature range with other compatible steer-by-wire autopilot packages. [158][159]
Warranty and Support
Garmin warranty terms vary by product and region, and the supplied specifications do not provide a named warranty period for this corepack. can help you review Yamaha Helm Master compatibility, the Helm Master EX exclusion, GHC 50 mounting options, network and gateway requirements, power supply, and required system components before purchase. Review the applicable Garmin warranty coverage and documented package contents before ordering.
Before Ordering the Garmin Reactor 40 Yamaha Helm Master Steer-By-Wire Corepack
Confirm that your vessel uses Yamaha Helm Master, rather than Helm Master EX, and has the required compatible steering components. You should verify the Yamaha gateway, NMEA 2000 network capacity, 10V to 30V DC supply, GHC 50 flush or bracket mounting space, cable routing, and all Garmin and Yamaha installation requirements before purchase.
Product Specifications
Garmin Reactor 40 Steer-By-Wire Corepack f/Yamaha Helm Master w/GHC 50 Autopilot Instrument
| Display Type | GHC 50 (5-inch Touchscreen) |
|---|---|
| Control Unit | Reactor 40 CCU |
| Drive Unit Compatibility | Yamaha Helm Master / Helm Master EX |
| Max Boat Displacement | Engine/System Dependent |
| Steering Type | Electronic Steer-By-Wire |
| Heading Sensor | 9-axis Solid-state AHRS |
| Operating Voltage | 10V to 30V DC |
| Power Consumption (Idle) | Less than 200 mA |
| Power Consumption (Typical) | System Dependent (Low Draw) |
| Networking (NMEA 2000/0183) | NMEA 2000 / Yamaha Gateway |
| Wireless Capabilities | ANT+ / Wi-Fi |
| Integration (MFD Support) | Full Garmin / Yamaha CL7 Integration |
| Sea State Optimization | Self-learning Algorithms |
| Course Accuracy | +/- 2 degrees |
| Rudder Reference Support | Virtual Rudder Feedback (Integrated) |
| Commissioning Method | Digital Configuration via GHC/MFD |
| Waterproof Rating | IPX7 |
| Operating Temperature | -15°C to 55°C |
| Mounting Options | Flush / Bracket Mount |
| Dimensions (Control Head) | 5.5" x 4.1" x 2.0" |
| In-box Contents | GHC 50, Reactor 40 CCU, GHP SBW ECU, Yamaha Cables |
| Key Features | Optimized for Yamaha DEC and Helm Master systems |
Related Products
Payment Protection
Checkout will use the selected PayPal or Stripe payment method.
Free International Shipping
Free standard delivery to the United States, Canada and Australia.
Product Support
Ask for product and compatibility information before ordering.
Reviews
There are no reviews yet.