Muir Storm VRC2200 1200W 2200lb Capstan Windlass

A 1,200W motor, vertical gypsy, and knurled capstan drum form theMuir Storm VRC2200deck arrangement. Available in 12V or 24V DC, this windlass has a stated maximum pull of 2,200 lbs and a 550 lbs continuous working-load rating. Polished marine-grade 316 stainless steel forms the listed deck unit and capstan drum.

The gypsy accepts 5/16 in DIN 766 or ISO 4565 chain with 9/16 in three-strand rope. A compact right-angle worm reduction layout transfers motor output. The fall-safe mechanical lock and socket clutch provide the listed anchor-holding and release functions.

Which Boats This Windlass Fits

The Storm VRC2200 windlass is recommended for express cruisers and center consoles from 32 to 45 ft. Its gypsy requires 5/16 in DIN 766 or ISO 4565 chain with 9/16 in three-strand rope. Buyers should match the named chain standard, chain diameter, rope size, and selected voltage configuration before ordering.

The 2,200 lbs figure represents the listed maximum pull rating. The 550 lbs working-load rating provides the separate continuous hauling value. Buyers should use the continuous figure when evaluating normal anchor retrieval requirements.

Care and Operating Notes

Rinse the deck unit, gypsy, capstan drum, chain, rope, mechanical lock, and socket clutch with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the rope-to-chain transition before operation. Inspect chain links, rope condition, lock movement, clutch action, drum surface, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for gearbox service, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The Storm VRC2200 carries a 3-year limited commercial and pleasure marine warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm whether the boat uses the 12V or 24V configuration, then match the listed current draw and breaker requirement to that choice. You should select 5/16 in DIN 766 or ISO 4565 chain with 9/16 in three-strand rope, compare the vessel with the 32 to 45 ft application guide, and allow for the 63.9 lbs unit mass. Consult manufacturer installation documentation for deck thickness, mounting dimensions, and required clearance.