Lofrans Project 1000 Windlass – Vertical, Capstand, Chrome, 5/16″ HT/BBB – 1000W

TheLofrans Project 1000combines a 1,000W 12V DC motor with a vertical deck-mounted gypsy and capstan drum. Its stated maximum pull reaches 1,984 lbs, while the continuous working-load rating is 298 lbs. The mirror-polished chrome-plated bronze housing and AISI 316 stainless steel shaft form the exposed deck assembly and drive system.

The gypsy accepts 5/16 in G4, HT, or BBB chain with 9/16 in three-strand rope. A capstan drum sits alongside the gypsy for separate line handling, and a manual friction clutch brake includes an integrated manual override. The provided product data does not confirm an anchor, rode, controls, contactor, or circuit breaker as included.

Which Boats This Windlass Fits

The Project 1000 vertical windlass is recommended for power and sailboats from 33 to 43 ft. Its rope-to-chain gypsy requires 5/16 in G4, HT, or BBB chain paired with 9/16 in three-strand rope. Both components must match the listed compatibility because the gypsy handles the chain links and rope section of the same rode.

the listed 1,984 lbs maximum pull is a peak pull rating. The 298 lbs working-load rating represents the separate continuous hauling value for regular retrieval planning. These figures describe different operating conditions and should not be used interchangeably.

Care and Operating Notes

Rinse the exposed housing, gypsy, capstan drum, chain, and rope with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from chain links, the rope section, and deck hardware before operation. Inspect the rope-to-chain transition, clutch movement, manual override access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The Project 1000 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode uses 5/16 in G4, HT, or BBB chain with 9/16 in three-strand rope. You should compare your boat with the 33 to 43 ft application guide, measure deck thickness against the 1.0 to 2.0 in mounting range, and allow for the 195 mm height, 150 mm base diameter, and 39.6 lbs dry weight. Check that your 12V system supports the listed 110A average draw and required 100A circuit breaker. Confirm controls, protection hardware, anchor, chain, and rope with the seller because the provided product data does not confirm them as included.