Lewmar Pro 1000H Windlass (Gypsy) – For Boats 20 to 45 ft. Max Pull: 1000 lbs.

TheLewmar Pro 1000Huses a 700W 12V DC motor in a horizontal above-deck gypsy-only configuration. The windlass has a stated maximum pull of 1,000 lbs and a 250 lbs continuous working-load rating. Its cast 316 stainless steel casing and drive shaft form the listed housing and drive assembly for 5/16 in G4 chain with 9/16 in three-strand rope.

A manual free-fall release controls the listed rode-release function, while the emergency manual override provides a separate recovery option. The unit fits deck thicknesses from 0.8 to 1.5 in. The provided product data does not confirm an anchor, rode, switch, contactor, or circuit breaker as included.

Which Boats This Windlass Fits

The Pro 1000H horizontal windlass is recommended for coastal and offshore boats from 20 to 45 ft. Its gypsy requires 5/16 in G4 chain with 9/16 in three-strand rope. The chain and rope sizes must match the confirmed gypsy configuration because the windlass handles the connected sections of the anchor rode.

the listed maximum pull is 1,000 lbs. The 250 lbs working-load rating identifies the separate continuous hauling figure. Buyers should use the continuous rating when assessing regular retrieval loads instead of treating peak pull as ongoing capacity.

Care and Operating Notes

Rinse the stainless steel casing, gypsy, chain, and rope with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the rope-to-chain transition and free-fall release area before operation. Inspect chain links, rope condition, manual override access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The Pro 1000H carries a 5-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode combines 5/16 in G4 chain with 9/16 in three-strand rope. You should compare your boat with the 20 to 45 ft application guide, measure deck thickness against the 0.8 to 1.5 in range, and reserve space for the 146 mm by 178 mm housing. Verify that your 12V electrical system supports the listed 50A average draw and required 70A circuit breaker. Confirm controls, circuit-protection hardware, anchor, chain, and rope with the seller because the provided product data does not confirm them as included.