Maxwell HRC-8 Free Fall 12v Horizontal Windlass for 5/16″ Chain & 9/16″ Line

An automatic free-fall system and 600W 12V DC motor define theMaxwell HRC-8horizontal above-deck windlass. It has a stated maximum pull of 900 lbs and a 350 lbs continuous working-load rating. The pressure die-cast anodized alloy casing forms the listed housing for the rope-to-chain configuration.

The gypsy accepts 5/16 in short-link chain with 9/16 in three-strand or 8-plait rope. A patented Wave Design free-fall control clutch manages the listed release function, while an emergency handle provides the listed manual-control feature.

Which Boats This Windlass Fits

The HRC-8 horizontal windlass is recommended for powerboats, cruisers, and fishing boats from 26 to 40 ft. Its gypsy requires 5/16 in short-link chain with 9/16 in three-strand or 8-plait rope. Buyers should match the chain link style, chain diameter, rope size, and rope construction before selecting anchor rode components.

The 900 lbs figure represents the listed maximum pull rating. The 350 lbs working-load rating provides the separate continuous hauling value. The continuous figure gives the relevant reference for normal anchor retrieval planning.

Care and Operating Notes

Rinse the housing, gypsy, chain, rope, and emergency handle with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the rope-to-chain transition and Wave Design clutch before operation. Inspect chain links, rope condition, clutch movement, emergency-handle access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for clutch service, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The HRC-8 carries a 3-year limited manufacturer warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that your anchor rode uses 5/16 in short-link chain with 9/16 in three-strand or 8-plait rope. You should compare your vessel with the 26 to 40 ft application guide, reserve space for the 145 mm by 245 mm housing, and confirm the 12V system can use the required 70A breaker. Consult manufacturer installation documentation for deck thickness, mounting dimensions, and below-deck clearance.