Lewmar Profish 1000 Free Fall Windlass 9/16″LINE 5/16″ G4

A horizontal above-deck layout and automatic drop free-fall system define theLewmar Pro-Fish 1000. The 700W motor operates on 12V DC and has a stated maximum pull of 1,000 lbs with a 250 lbs continuous working-load rating. The cast 316 stainless steel body and drive shaft support a rope-to-chain gypsy for 5/16 in G4 or G43 chain and 9/16 in three-strand rope.

The automatic drop mechanism provides the listed free-fall release function, and the emergency manual override provides a separate recovery option. This model fits deck thicknesses from 0.8 to 1.5 in. The provided product data does not confirm an anchor, rode, switch, contactor, circuit breaker, or other electrical controls as included.

Which Boats This Windlass Fits

The Pro-Fish 1000 horizontal windlass is recommended for coastal and offshore boats from 28 to 38 ft. Its combination gypsy requires 5/16 in G4 or G43 high-test chain with 9/16 in three-strand rope. The chain and rope dimensions both matter because the gypsy must handle each section of the connected anchor rode.

the listed maximum pull is 1,000 lbs. The 250 lbs working-load rating gives the distinct continuous hauling figure. Buyers should consider the continuous rating when evaluating normal retrieval requirements rather than treating maximum pull as an ongoing load value.

Care and Operating Notes

Rinse the exposed housing, gypsy, chain, and rope with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from the rope-to-chain transition and free-fall mechanism before operation. Inspect chain links, rope condition, free-fall movement, emergency manual override access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The Pro-Fish 1000 carries a 5-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode combines 5/16 in G4 or G43 high-test chain with 9/16 in three-strand rope. You should check that the boat falls within the 28 to 38 ft application guide, measure deck thickness against the 0.8 to 1.5 in range, and reserve space for the 146 mm by 178 mm housing. Verify that the 12V electrical system supports the listed 50A average draw and required 70A circuit breaker. Confirm package contents with the seller if you need an anchor, rode, switches, contactor, or circuit-protection hardware.