
AB Mares 10 VSX 10’6″ Fiberglass Console Yacht Tender
Luxury yacht swim platforms secure this compact AB Mares 10 yacht tender, which pairs a double-molded fiberglass deep-V hull with integrated spray rails, carrying 4 guests and 992 lbs with a 25 HP motor at 385 lbs.
- Molded spray rails deliver dry tracking
- Built-in 5.8-gallon tank feeds console outboards
- Double-molded fiberglass deck stops hull flexing
- Orca Hypalon collar prevents UV chalking
Review the hull, deck, and propulsion requirements of the AB Inflatables Mares 10 VSX before selecting an outboard. This 3.20 m, or 10 ft 6 in, console yacht tender uses a deep-V double molded fiberglass hull with integrated spray rails. A molded non-skid pattern covers the hand-laid fiberglass deck, while three ORCA CSM 1100 dtex buoyancy tubes use cold-cured hand-laminated seams. Plan lifting and storage around the 175 kg, or 385 lb, net weight.
ISO capacity is four persons, and passenger and cargo planning must remain within the 450 kg, or 992 lb, maximum payload. An integrated 22 L, or 5.8 gal, fuel tank is part of the console configuration. A 15-inch short-shaft outboard is required, with 15 HP recommended, 25 HP maximum, and a 70 kg, or 154 lb, maximum engine weight.
Why Choose the AB Inflatables Mares 10 VSX Rigid Inflatable Boat
The Mares 10 VSX rigid inflatable boat combines a 3.20 m fiberglass deep-V hull with double molded construction, integrated spray rails, a 22 L fuel tank, sport console, and three ORCA CSM buoyancy chambers. Its 175 kg net weight, four-person ISO capacity, 450 kg payload rating, short-shaft outboard requirement, 15 HP recommended power, 25 HP maximum power, and 70 kg engine limit provide clear comparison points for a compact console tender.
Warranty and Support
AB Inflatables provides a 10-Year Limited Warranty covering ORCA CSM fabric and fiberglass hull structure. can help you review the 3.20 m hull dimensions, 175 kg net weight, 22 L fuel-tank arrangement, short-shaft outboard requirement, and stated passenger, payload, and engine limits against your planned tender, lift, trailer, dock, and propulsion setup. Review the stated warranty coverage and documented included equipment before ordering.
Before Ordering the AB Inflatables Mares 10 VSX Rigid Inflatable Boat
Confirm that your lifting, trailer, dock, and storage plan supports the 3.20 m overall length and 175 kg net weight. You should use a 15-inch short-shaft outboard, select 15 HP as the recommended power level, avoid exceeding 25 HP or 70 kg engine weight, confirm the 22 L fuel-tank configuration, and remain within the four-person and 450 kg maximum capacity limits.
Product Specifications
AB Mares 10 VSX 10'6" Fiberglass Console Yacht Tender
| Brand | AB Inflatables |
|---|---|
| Full Model SKU / Code | Mares 10 VSX |
| Boat Type | Luxury Sport Console Yacht Tender RIB |
| Floor Type | Hand-Laid Fiberglass Deck with Molded Non-Skid Pattern |
| Hull / Keel Design | Deep-V Double Molded Fiberglass Hull with Integrated Spray Rails |
| Fabric Material | ORCA® CSM / Hypalon Fabric (1100 dtex) |
| Assembly / Seam Technology | Cold-Cured Hand-Laminated Seams |
| CE Design Category | Category C (Inshore/Coastal) |
| Overall Length | 3.20 m / 10 ft 6 in |
| Inside Length | 2.40 m / 7 ft 10 in |
| Overall Width | 1.68 m / 5 ft 6 in |
| Inside Width | 0.79 m / 2 ft 7 in |
| Tube Diameter | 0.41 m / 16 in |
| Total Net Weight | 175 kg / 385 lbs |
| Max Passenger Capacity (ISO) | 4 Persons |
| Max Payload Capacity | 450 kg / 992 lbs |
| Number of Air Compartments | 3 Buoyancy Tubes |
| Valve Type | Leafield C7 Push-Push Valves |
| Outboard Engine Shaft Length | Short Shaft (15" / S) |
| Recommended Engine Power | 15 HP / 11 kW |
| Max Allowed Engine Power | 25 HP / 18.6 kW |
| Max Allowed Engine Weight | 70 kg / 154 lbs |
| Built-In Fuel Tank Capacity | 22 L / 5.8 gal (EPA/USCG Compliant Tank) |
| Standard Equipment Included | Deluxe Sport Console with Steering System, Upholstered Bow Cushion, Rear Bench Seat with Storage, Integrated Fuel Tank, LED Navigation Lights, Automatic Bilge Pump, Stainless Steel Grab Rails |
| Manufacturer Warranty | 10 Years Limited Warranty (Covers ORCA Hypalon Fabric & Fiberglass Hull Structure) |
Payment Protection
Checkout will use the selected PayPal or Stripe payment method.
Free International Shipping
Free standard delivery to the United States, Canada and Australia.
Product Support
Ask for product and compatibility information before ordering.
Reviews
There are no reviews yet.