Aquaglide Escalade Yacht Climbing Wall

A 16 ft 5 in vertical frame makes theAquaglide Escaladea Yacht Series over-water inflatable climbing wall. The Duratex 0.90 mm reinforced PVC structure inflates to 7 ft by 3 ft 3 in by 16 ft 5 in. It supports one climber within a stated 250 lbs maximum load.

Heavy-duty yacht-side mounting straps, D-rings, and universal hull tie-offs form the listed mounting interface. The rigid inflatable frame operates at 3.0 PSI. A minimum water depth of 10 ft provides the listed fall-zone clearance under the climbing wall.

Care and Operating Notes

Rinse the PVC surface, straps, D-rings, tie-offs, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect straps, D-rings, tie-off points, seams, valves, and visible PVC surfaces before operation. Follow manufacturer instructions for inflation, yacht-side mounting, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Escalade carries a 3-year limited commercial fleet warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the yacht-side location provides suitable strap and tie-off points with at least 10 ft of water depth below the wall. Plan for one climber within the 250 lbs maximum load, maintain 3.0 PSI frame pressure, allow for the 7 ft by 3 ft 3 in by 16 ft 5 in inflated structure, and account for the 128 lbs dry weight during setup.