
CTM Marine CX-12HN 12000 BTU NMEA 2000 Condenser 230V
The CTM Marine CX-12HN supplies a 12,000 BTU NMEA 2000 condenser using 230V power for compatible marine split A/C systems.
- 12,000 BTU capacity suits medium cabins.
- 230V input guides installation compatibility.
- NMEA 2000 supports networked operation.
- Condenser serves marine split A/C.
- CX-12HN identifies the model.
For boats standardized on 230V power, the CTM CX-12HN condenser delivers 12,000 BTU of split-system cooling and reverse cycle heating — purpose-built as a drop-in replacement for the Dometic DEU12 and DEG12 units, with the titanium coil construction and NMEA 2000 integration found across CTM’s condenser lineup.
Why Choose the CTM CX-12HN
If you’re replacing a Dometic DEU12 or DEG12, this unit is built to match those units’ dimensions and waterline connections closely enough that installation typically doesn’t require significant modification — though double-checking your specific installation space against the CX-12HN’s specs before ordering is still worth the few minutes it takes.
Being a condenser-only unit, this pairs with a separately purchased evaporator installed in the cabin space, connected via insulated refrigerant lines — standard for split systems, and the reason they run quieter in the living area than self-contained units.
What to Know Before Installing
- EPA certification must be provided before shipping
- Requires a separately purchased evaporator — this listing is the condenser only
- If replacing a Cruisair RX unit, the evaporator will also need replacing since RX systems use R22/R417A refrigerant, not R410A
- Waterline connections use a standard 5/8″ fitting
Product Specifications
Product Specifications
| Brand | CTM Marine |
|---|---|
| Full Model SKU/Code | CX-12HN-230V (CX Series NMEA 2000) |
| Country of Origin | USA |
| AC System Type | Split-System Marine Central Condenser Unit (Requires Remote Air Handler) |
| Cooling Capacity | 12,000 BTU/h (3.5 kW) |
| Heating Capacity | 12,000 BTU/h (Reverse Curve Heat Pump Mode) |
| Refrigerant Type | R-410A Pre-Charged Eco-Friendly Gas |
| Compressor Technology | High-Efficiency Hermetic Rotary Compressor |
| Operating Voltage / Frequency | 230 Volts AC / 50 or 60 Hz Single Phase Platform |
| Full Load Amps / Running Current | Cooling Duty: 4.1 Amps / Heating Duty: 4.6 Amps at 230V Input Cycle |
| Locked Rotor Amps / Starting Current | 21.0 Amps LRA Base Threshold |
| Recommended Circuit Breaker Rating | 15 Amps Heavy-Duty Marine Breaker |
| Required Sea Water Flow Rate | 200 GPH / 12.6 Liters per minute minimum loop |
| Sea Water Inlet/Outlet Size | 5/8" (16mm) Outer Diameter Hose Barb Connections |
| Condenser Coil Material | Corrosion-Resistant Cupronickel (CuNi 90/10) Coaxial Heat Exchanger Tube |
| Control Interface Connectivity | Integrated NMEA 2000 Data Bus Core Terminal / Digital Touch MFD Screen Overlays |
| Dimensions (L x W x H) | 38.1 cm x 29.2 cm x 30.5 cm / 15.0" x 11.5" x 12.0" |
| Dry Weight | 20.0 kg / 44.0 lbs (Built on non-magnetic marine stainless steel chassis pan) |
| Application | Dedicated remote environmental management for standard master staterooms, catamaran hulls, and active pilothouse systems navigating global 230V networks (28-38 ft boat lengths) |
Payment Protection
Checkout will use the selected PayPal or Stripe payment method.
Free International Shipping
Free standard delivery to the United States, Canada and Australia.
Product Support
Ask for product and compatibility information before ordering.

Reviews
There are no reviews yet.