
CTM Marine CX-16 16000 BTU Split A/C Condenser 115V
CTM Marine CX-16 serves as a 16,000 BTU split A/C condenser with 115V power for compatible marine climate installations.
- 16,000 BTU output handles medium zones.
- 115V input matches listed systems.
- Condenser supports split-system operation.
- Matched evaporator completes the system.
- CX-16 identifies the model configuration.
Standard 115V shore power gets the same 16,000 BTU capacity with the CTM CX-16 condenser — a direct drop-in replacement for the Dometic DEU16, ED16U, and EQ16U 115V units, without the added cost of soft start technology most boats with adequate 115V circuits don’t need.
Choosing this standard version over the soft-start CX-16S is a straightforward decision for boats that already have sufficient breaker capacity on their 115V circuit — you get identical cooling and heating output, identical titanium coil construction, and identical control board compatibility, just without paying for a feature your electrical system doesn’t require.
Why Choose the CTM CX-16
This is the standard-voltage entry point into CTM’s 16,000 BTU split lineup for most US boats, and it’s backed by CTM’s standard 2-year warranty against material and workmanship defects. If you’re replacing a Dometic ED16U or EQ16U rather than a DEU16, the physical and electrical specs still line up closely enough for a direct swap.
What to Know Before Installing
- EPA certification must be provided before shipping
- Requires a separately purchased evaporator — this listing is the condenser only
- Confirm your electrical panel supports the 13.5A heating draw at 115V
- If replacing a Cruisair RX unit, the evaporator will also need replacing due to the R22/R417A vs. R410A refrigerant difference
Product Specifications
Product Specifications
| Brand | CTM Marine |
|---|---|
| Full Model SKU/Code | CX-16-115V (CX Series Split Condenser) |
| Country of Origin | USA |
| AC System Type | Split-System Marine Central Condenser Unit (Cool Only Configuration) |
| Cooling Capacity | 16,000 BTU/h (4.7 kW) |
| Refrigerant Type | R-410A Pre-Charged Eco-Friendly Gas |
| Compressor Technology | High-Efficiency Hermetic Rotary Compressor |
| Operating Voltage / Frequency | 115 Volts AC / 60 Hz Single Phase Base Rail |
| Full Load Amps / Running Current | Cooling Duty: 9.6 Amps at 115V Operational Duty Cycle |
| Locked Rotor Amps / Starting Current | 45.0 Amps LRA Base Threshold |
| Recommended Circuit Breaker Rating | 25 Amps Heavy-Duty Marine Breaker |
| Required Sea Water Flow Rate | 250 GPH / 15.8 Liters per minute minimum loop |
| Sea Water Inlet/Outlet Size | 5/8" (16mm) Outer Diameter Hose Barb Connections |
| Condenser Coil Material | Corrosion-Resistant Cupronickel (CuNi 90/10) Coaxial Heat Exchanger Tube |
| Control Interface Connectivity | Digital Display Control Box Terminal / Multi-System Interface Sync Hub |
| Dimensions (L x W x H) | 38.1 cm x 29.2 cm x 30.5 cm / 15.0" x 11.5" x 12.0" |
| Dry Weight | 21.8 kg / 48.0 lbs (Built on non-magnetic marine stainless steel chassis pan) |
| Application | Mid-size boat central cooling, sportfishers, multi-cabin motor cruisers, and express center console sub-compartments on North American power grids (30-45 ft boat lengths) |
Payment Protection
Checkout will use the selected PayPal or Stripe payment method.
Free International Shipping
Free standard delivery to the United States, Canada and Australia.
Product Support
Ask for product and compatibility information before ordering.
Reviews
There are no reviews yet.