
CTM Marine CX-16N 16000 BTU NMEA 2000 Condenser 115V
CTM Marine CX-16N provides a 16,000 BTU NMEA 2000 condenser with 115V power for compatible marine split A/C installations.
- 16,000 BTU output handles medium spaces.
- 115V supply suits listed installations.
- NMEA 2000 enables connected controls.
- Condenser supports marine split systems.
- CX-16N identifies the configuration.
Standard 115V shore power gets the same 16,000 BTU capacity with the CTM CX-16N condenser — a direct drop-in replacement for the Dometic DEU16, ED16U, and EQ16U 115V units, sharing the same titanium coil construction and NMEA 2000 platform as CTM’s 230V models.
Why Choose the CTM CX-16N
Current draw runs notably higher than the 230V CX-16HN — 10.5A versus 5.1A cooling — which is expected given the voltage difference, but confirm your boat’s 115V circuit and breaker capacity can handle it, especially the 13.5A heating draw.
If you’re replacing a Dometic ED16U or EQ16U rather than a DEU16, the physical and electrical specs still line up closely enough that this should work as a direct swap, though it’s worth double-checking your specific installation space before ordering.
What to Know Before Installing
- EPA certification must be provided before shipping
- Requires a separately purchased evaporator — this listing is the condenser only
- Confirm your electrical panel supports the 13.5A heating draw at 115V
- If replacing a Cruisair RX unit, the evaporator will also need replacing due to the R22/R417A vs. R410A refrigerant difference
Product Specifications
Product Specifications
| Brand | CTM Marine |
|---|---|
| Full Model SKU/Code | CX-16N-115V (CX Series NMEA 2000) |
| Country of Origin | USA |
| AC System Type | Split-System Marine Central Condenser Unit (Cool Only Configuration) |
| Cooling Capacity | 16,000 BTU/h (4.7 kW) |
| Refrigerant Type | R-410A Pre-Charged Eco-Friendly Gas |
| Compressor Technology | High-Efficiency Hermetic Rotary Compressor |
| Operating Voltage / Frequency | 115 Volts AC / 60 Hz Single Phase Base Rail |
| Full Load Amps / Running Current | Cooling Duty: 9.6 Amps at 115V Operational Duty Cycle |
| Locked Rotor Amps / Starting Current | 45.0 Amps LRA Base Threshold |
| Recommended Circuit Breaker Rating | 25 Amps Heavy-Duty Marine Breaker |
| Required Sea Water Flow Rate | 250 GPH / 15.8 Liters per minute minimum loop |
| Sea Water Inlet/Outlet Size | 5/8" (16mm) Outer Diameter Hose Barb Connections |
| Condenser Coil Material | Corrosion-Resistant Cupronickel (CuNi 90/10) Coaxial Heat Exchanger Tube |
| Control Interface Connectivity | Integrated NMEA 2000 Data Bus Core Terminal / Digital Touch MFD Screen Overlays |
| Dimensions (L x W x H) | 38.1 cm x 29.2 cm x 30.5 cm / 15.0" x 11.5" x 12.0" |
| Dry Weight | 21.8 kg / 48.0 lbs (Built on non-magnetic marine stainless steel chassis pan) |
| Application | Mid-size boat central cooling infrastructures, sportfishers, multi-cabin motor cruisers, and express center console sub-compartments on North American power grids (30-45 ft boat lengths) |
Payment Protection
Checkout will use the selected PayPal or Stripe payment method.
Free International Shipping
Free standard delivery to the United States, Canada and Australia.
Product Support
Ask for product and compatibility information before ordering.
Reviews
There are no reviews yet.