
Digital Yacht HSC100 High Performance Fluxgate Sensor
Autopilot heading stability improves once the Digital Yacht HSC100 fluxgate compass outputs real-time data over NMEA 0183 and NMEA 2000 lines, using electronic leveling to counter vessel roll inside an IPX5 water-resistant housing at 0.88 lbs.
- Dual NMEA interfaces broadcast heading telemetry
- Solid-state fluxgate array eliminates mechanical wear
- Electronic leveling stabilizes choppy sea roll
- IPX5 water-resistant housing protects electronic circuitry
- Bulkhead mounting fits tight navigation compartments
Modern helms run on data, and the Digital Yacht HSC100 delivers exactly that. This high-performance digital fluxgate heading sensor ditches the old spinning card for a purely solid-state electronic design. It feeds highly accurate heading information directly into your NMEA 0183 or NMEA 2000 network without skipping a beat. You never have to worry about mechanical wear and tear from traditional jewel-and-pivot setups. Electronic leveling takes care of the stability, while automatic calibration makes the initial setup surprisingly painless. You can still dial in manual offsets if your specific hull requires it.
Finding a dry spot to mount electronics can be tricky, but this sensor is built for the reality of boating. The IPX5 water-resistant housing shrugs off spray and dampness easily. It survives freezing winter storage down to -15°C and bakes in summer heat up to 55°C without failing. You can screw it flat onto a deck or sideways against a bulkhead. Taking up just 130 x 130 x 50 millimeters of space and weighing less than a pound, it hides away perfectly out of sight.
Helm Use and Readability
You won’t look directly at the HSC100 while driving. Instead, this sensor works behind the scenes, pushing rapid heading updates to your primary displays. This means your chartplotter, radar overlay, and autopilot receive a constant, stabilized signal. When you are fighting rough water, that fast data refresh rate prevents your autopilot from oversteering and keeps your radar targets pinned exactly where they actually are.
Why Choose the Digital Yacht HSC100 High-Performance Digital Fluxgate Heading Sensor
Bridging the gap between legacy gear and modern networks is where the HSC100 really shines. Its dual-network output solves major integration headaches for boats undergoing electronics refits. Moving to a solid-state fluxgate means zero moving parts to wear out or get stuck during heavy rolls. If you want crisp, unwavering radar overlays and an autopilot that steers straight in a following sea, this is the hardware that makes it happen.
Warranty and Support
Digital Yacht backs this sensor with a solid 2-Year Onboard Warranty against factory defects. If you are unsure about network compatibility, offers direct support to answer your integration questions before you buy. Every box is physically opened and checked by their team to ensure all manuals and components are present before it ships to your door. Take a moment to read through the specific warranty terms on before checking out.
Before Ordering the Digital Yacht HSC100 High-Performance Digital Fluxgate Heading Sensor
Stop and map out your electronics network before adding this to your cart. Confirm that your current chartplotter or autopilot has an open NMEA 0183 port or that your NMEA 2000 backbone has a spare T-connector. Scout your boat for a clean mounting location that sits away from speakers or wiper motors. Finally, make sure you have the right drop cables on hand to physically connect the sensor to your existing helm network.
Product Specifications
Digital Yacht HSC100 High Performance Fluxgate Sensor
| Brand | Digital Yacht |
|---|---|
| Full Model SKU / Code | ZDIGHSC100 |
| Device Type | High-Performance Digital Fluxgate Heading Sensor |
| Card Style / Design | N/A (Digital Heading Output via NMEA 0183 & NMEA 2000) |
| Apparent Dial Size | N/A |
| Night Lighting / Illumination | N/A |
| Compensation / Correctors | Automatic Calibration and Manual Offset Adjustment |
| Gimbaling System | Electronic / Solid-State Leveling Stabilization |
| Jewel & Pivot Movement | N/A (Solid-State Fluxgate Technology) |
| Operating Temperature | -15°C to 55°C (5°F to 131°F) |
| Waterproof Rating | IPX5 Water Resistant |
| Mounting Options | Bulkhead / Flat Surface Mount |
| Dimensions (L x W x H) | 130 x 130 x 50 mm (5.1 x 5.1 x 2.0 in) |
| Dry Weight | 0.4 kg (0.88 lbs) |
Payment Protection
Checkout will use the selected PayPal or Stripe payment method.
Free International Shipping
Free standard delivery to the United States, Canada and Australia.
Product Support
Ask for product and compatibility information before ordering.
Reviews
There are no reviews yet.