
Flagship FM60CW 60000 BTU 230V Marine Water Chiller
The Flagship FM60CW delivers 60,000 BTU marine water chiller capacity through 230V power for centralized cool-only onboard systems.
- 60,000 BTU output suits medium systems.
- 230V supply matches listed power.
- Water chiller supports centralized cooling.
- Cool-only design does not heat.
- FM60CW identifies the model.
For boats stepping into chiller territory without needing six-figure BTU capacity, the Flagship FM60CW delivers 60,000 BTU in a notably compact 25″ x 15.5″ x 23″ footprint — this compact yacht chiller system fits installation spaces that a comparable split system setup often can’t match once you account for multiple condensers and evaporators.
At 60,000 BTU, this unit sits at a practical entry point for boats with two or three independent zones that still want the single-service-point simplicity of a central plant rather than juggling separate split systems for each area, without the cost and footprint of Flagship’s largest chillers.
Why Choose the Flagship FM60CW
Flagship’s published warranty terms cover the condenser, chassis, compressor, and evaporator for five years parts and one year labor, with controls, pump, and blower covered for one year parts and labor. Given the weight discrepancy noted above, confirming exact shipping specs with Flagship or CTM is worthwhile if you’re planning freight logistics closely.
What to Know Before Installing
- Confirm exact operating voltage directly with Flagship, since it isn’t specified on this particular listing
- This chiller requires separately specified air handlers distributed to each independent zone — it is not a complete system on its own
- Ships via freight; confirm actual weight with Flagship or CTM given the discrepancy noted above
- Professional installation and electrical planning is strongly recommended
Product Specifications
Product Specifications
| Brand | Flagship Marine |
|---|---|
| Full Model SKU/Code | FM60CW (230V Variant) |
| Country of Origin | USA |
| AC System Type | Central Chilled Water Marine Air Conditioning System (Single Stage Chiller) |
| Cooling Capacity | 60,000 BTU/h (17.6 kW / 5 Tons) |
| Heating Capacity | 60,000 BTU/h (Reverse Cycle Heat Pump Mode) |
| Refrigerant Type | R-410A Pre-Charged Environmentally Graded Gas |
| Compressor Technology | High-Efficiency Hermetic Scroll Compressor |
| Operating Voltage / Frequency | 230 Volts AC / 60 Hz Single Phase Base Rail |
| Full Load Amps / Running Current | Cooling Duty: 19.5 Amps / Heating Duty: 22.0 Amps at 230V Input Cycle |
| Locked Rotor Amps / Starting Current | 96.0 Amps LRA Base Threshold (Can be paired with an optional soft start) |
| Recommended Circuit Breaker Rating | 30 Amps Heavy-Duty Marine Breaker |
| Required Sea Water Flow Rate | 750 GPH / 47.3 Liters per minute minimum loop |
| Sea Water Inlet/Outlet Size | 1.0" (25.4mm) Inner Diameter Hose Barb Connections |
| Chilled Water Loop Connections | 1.0" (25.4mm) FPT Freshwater Internal Loop Interface Ports |
| Condenser Coil Material | Corrosion-Resistant Cupronickel (CuNi 90/10) Coaxial Heat Exchanger Tube |
| Control Interface Connectivity | Digital Display Control Box Terminal / Multi-System Interface Hub Panel |
| Dimensions (L x W x H) | 61.0 cm x 40.6 cm x 43.2 cm / 24.0" x 16.0" x 17.0" |
| Dry Weight | 65.8 kg / 145.0 lbs (Built on heavy-duty non-magnetic 316 marine stainless steel base chassis) |
| Application | Central marine HVAC distribution loops for mid-to-large motor yachts, deep-sea sportfishers, long-range trawlers, and catamaran bridging hulls (42-65 ft boat lengths) |
Payment Protection
Checkout will use the selected PayPal or Stripe payment method.
Free International Shipping
Free standard delivery to the United States, Canada and Australia.
Product Support
Ask for product and compatibility information before ordering.
Reviews
There are no reviews yet.