
Flagship FM18RLP – 18,000 BTU Marine Air Conditioner 230V Cool & Heat Low Profile
Flagship FM18RLP delivers 18,000 BTU cooling and heating through 230V power in a low-profile marine air conditioner.
- 18,000 BTU capacity supports larger cabins.
- 230V input matches listed systems.
- Cool and heat provide dual-mode operation.
- Low-profile design reduces installation height.
- Marine conditioner manages cabin climate.
Catamarans and boats with tight overhead clearance rarely have room for a standard-height AC unit, and Flagship built the FM18RLP specifically around that constraint — just 11 inches tall, delivering 18,000 BTU of both cooling and heating on 230V power without the printed circuit board that tends to be the first thing to fail on other units.
Why Choose the Flagship FM18RLP
At 11 inches tall, this unit fits into low-clearance spaces that would rule out most 16,000+ BTU systems entirely — the trade-off is a made-to-order build with a longer lead time (typically 5-6 days) rather than something that ships same-day off a shelf. Flagship has built these in Stuart, Florida since 1995, and the no-PC-board design is a deliberate choice to reduce the kind of electronic failures that plague more complex control systems.
This 230V configuration draws less current than the equivalent 115V version for the same output — worth factoring in if your boat’s 230V circuit capacity is limited compared to what a 115V setup would need.
What to Know Before Installing
- Units are made-to-order with a typical 5-6 day lead time before shipping
- Ships via LTL freight on a semi-tractor trailer to a commercial address only — residential delivery is not standard
- An optional install kit is available separately for a complete setup
- Confirm whether top or side discharge better fits your installation before ordering, since this is a build-to-order selection
Product Specifications
Product Specifications
| Brand | Flagship Marine |
|---|---|
| Exact Model Code / SKU | FM18RLP (230V Cool & Heat) |
| Country of Origin | USA |
| System Architecture | Self-Contained Low-Profile Marine A/C System |
| Cooling Capacity - BTU/h | 18,000 BTU/h |
| Cooling Capacity - kW/Watts | 5.27 kW |
| Heating Capacity - BTU/h | 18,000 BTU/h |
| Reverse Cycle Heating Function | Yes |
| Electrical Voltage | 230V |
| Alternating Current Frequency | 50/60 Hz |
| Electrical Phase | Single Phase |
| Full Load Amps - FLA Cooling | 6.9 A |
| Full Load Amps - FLA Heating | 8.3 A |
| Locked Rotor Amps - LRA | 32 A |
| Max Circuit Breaker Size | 20 A |
| Refrigerant Type | R-410A |
| Compressor Type | Hermetic Rotary |
| Seawater Water Flow Rate | 4.16 GPM (250 GPH) |
| Seawater Inlet Pipe Size | 5/8 inch (16 mm) |
| Seawater Outlet Pipe Size | 5/8 inch (16 mm) |
| Evaporator Airflow Capacity | 550 CFM |
| Duct Discharge Connection Diameter | 6 inches (152 mm) |
| Condensate Drain Connection Size | 1/2 inch (12.7 mm) |
| Physical Dimensions - Unit | 12.0 x 21.0 x 15.0 inches (305 x 533 x 381 mm) |
| Net Weight | 74 lbs (33.6 kg) |
| Chassis & Condenser Material | Stainless Steel Frame & Cupronickel Condenser Coil |
| Standard Factory Warranty | 5 Years (Limited) |
| Application & Sizing Guidance | 230V low-profile variant configured for international shore infrastructure or 50/60Hz vessels; maximizes vertical space clearance in cabins up to 1,000 cu.ft, min generator 4.5 kW. |
Payment Protection
Checkout will use the selected PayPal or Stripe payment method.
Free International Shipping
Free standard delivery to the United States, Canada and Australia.
Product Support
Ask for product and compatibility information before ordering.
Reviews
There are no reviews yet.