
Flagship FM240CW – Chiller 240,000 BTU’S – 230V – Cool Only
The Flagship FM240CW supplies 240,000 BTU’S of cool-only chiller capacity through 230V power for large marine cooling systems.
- 240,000 BTU’S handles high cooling loads.
- 230V supply guides system compatibility.
- Cool-only design does not heat.
- Chiller capacity supports centralized systems.
- FM240CW identifies the model.
The largest chiller in Flagship’s water-cooled lineup, the FM360CW delivers 360,000 BTU of cooling capacity for the biggest yachts running the most demanding multi-zone cooling loads. Built to order rather than stocked, this unit shares the same copper-nickel condenser and 316 stainless steel construction as the rest of Flagship’s chiller range, scaled up to handle a footprint few other systems can match.
At 1,147 lbs and priced well into five figures, this is equipment for vessels where a central chiller plant genuinely outperforms a collection of individual split systems — fewer total components to maintain, one central point of service, and enough capacity headroom that expanding to additional zones later doesn’t mean adding a whole new independent system.
Why Choose the Flagship FM360CW
Flagship’s published warranty terms cover the condenser, chassis, compressor, and evaporator for five years parts and one year labor, with controls, pump, and blower covered for one year parts and labor. This unit ships built to order, so lead time and the voltage/phase discrepancy above both need confirming with Flagship or CTM directly before you commit to this level of investment.
What to Know Before Installing
- Confirm actual voltage and phase configuration directly with Flagship given the discrepancy noted in the specifications above
- Built to order — confirm current lead time before finalizing your installation schedule
- This chiller requires separately specified air handlers distributed to each independent zone — it is not a complete system on its own
- Ships via freight given the 1,147 lb weight; commercial delivery address required
Product Specifications
Product Specifications
| Brand | Flagship Marine |
|---|---|
| Exact Model Code / SKU | FM240CW (Cool Only) |
| Country of Origin | USA |
| System Architecture | Centralized Marine Chilled Water System (Chiller) |
| Cooling Capacity - BTU/h | 240,000 BTU/h |
| Cooling Capacity - kW/Watts | 70.34 kW |
| Heating Capacity - BTU/h | 0 (Cool Only) |
| Reverse Cycle Heating Function | No |
| Electrical Voltage | 230V |
| Alternating Current Frequency | 60 Hz |
| Electrical Phase | 3-Phase (Standard configuration for this framework capacity) |
| Full Load Amps - FLA Cooling | 54.0 A (3-Phase Nominal Layout) |
| Locked Rotor Amps - LRA | 235 A |
| Max Circuit Breaker Size | 80 A |
| Refrigerant Type | R-410A |
| Compressor Type | Dual Hermetic Scroll |
| Seawater Water Flow Rate | 40.0 GPM (2,400 GPH) |
| Seawater Inlet Pipe Size | 1-1/2 inch (38.1 mm) |
| Seawater Outlet Pipe Size | 1-1/2 inch (38.1 mm) |
| Physical Dimensions - Unit | 32.0 x 24.0 x 22.0 inches (813 x 610 x 559 mm) |
| Net Weight | 340 lbs (154.2 kg) |
| Chassis & Condenser Material | Stainless Steel Frame & Multi-Stack Cupronickel Heat Exchangers |
| Standard Factory Warranty | 5 Years (Limited) |
| Application & Sizing Guidance | Heavy commercial or super-yacht central cooling module intended for multi-deck structures up to 100+ ft, drives 10 to 18 remote blower arrays, min generator 30.0 kW. |
Payment Protection
Checkout will use the selected PayPal or Stripe payment method.
Free International Shipping
Free standard delivery to the United States, Canada and Australia.
Product Support
Ask for product and compatibility information before ordering.
Reviews
There are no reviews yet.