Reverso FPS 80 Fuel Polishing System – 24V – 80 GPH – Mechanical Controller

Polish fuel from a 24V vessel system with the Reverso FPS 80 Fuel Polishing System – 24V – 80 GPH – Mechanical Controller. This compact manual-control 24V marine fuel polishing system is specified for auxiliary day tanks, diesel generators, and auxiliary power units, with an 80 GPH (303 LPH/1.33 GPM) processing rate.

The FPS-080-24V-M uses a Racor 500 Series compatible filtration chamber with a T-handle top and a self-priming positive-displacement vane pump. Its heavy-duty mechanical toggle switch provides continuous run mode, while integrated thermal overload motor protection is listed for the system.

Fitment and Maintenance Use

The Reverso FPS-080-24V-M is specified for auxiliary day tanks, diesel generators, and auxiliary power units. It supports manual fuel polishing through a Racor 500 Series compatible filtration chamber on a 24V DC dedicated vessel-power system and is optimized for marine tanks up to 400 gallons. Confirm fitment using the engine model, serial number, and manufacturer service documentation before ordering.

Before Ordering the Reverso FPS 80

Confirm that Reverso Pumps part number FPS-080-24V-M fits your auxiliary day tank, diesel generator, or auxiliary power unit application. Verify the 24V DC vessel-power requirement, 80 GPH (303 LPH/1.33 GPM) processing rate, Racor 500 Series compatible filtration chamber with T-handle top, mechanical toggle switch, continuous run mode, stated 400-gallon tank optimization, self-priming positive-displacement vane pump, 3/8-inch male flare ports, thermal overload protection, and 15.0 x 11.0 x 7.0 inch installation size. Confirm compatibility with your engine manufacturer’s documentation before purchase.