
Tohatsu MFS30CETL 30HP – EFI Power Tilt 20-Inch Shaft
The Tohatsu MFS30CETL couples a 500cc SOHC EFI powerhead with full hydraulic power tilt, built for aluminum runabouts on a 20-inch shaft. It charges at 17.5 Amps.
- 500cc SOHC block delivers 30 horsepower
- Power tilt enables effortless shallow running
- 17.5A alternator charges auxiliary battery banks
Tohatsu MFS30CETL 30HP 3-Cylinder EFI Power Tilt
The Tohatsu MFS30CETL is a high-authority 3-cylinder 30HP outboard engineered for convenience and mechanical precision on high-transom console boats in the North American maritime sector. Built on a robust 500cc inline SOHC architecture and weighing 157 lbs, this unit features a specialized Power Tilt system and remote electronic start. This 20-inch shaft model is the premier choice for small center consoles requiring advanced marine propulsion units with strong low-end torque and the tactical authority needed for helm handling during coastal transits.
Peak operational performance occurs between 5500 and 6100 RPM, delivering immediate throttle response at the remote control. The specialized 2.17:1 gear ratio facilitates the mechanical translation of 3-cylinder power into rapid hole-shot capability and steady hull planing. This engine exemplifies Japanese engineering excellence, ensuring the corrosion-resistant block maintains high thermal efficiency while the EFI system provides reliable ignition and electrical authority for serious small-craft captains across the United States.
Precision Engine Architecture
The FourStroke 30HP engine technology leverages its 3-cylinder big-block architecture to maximize low-end thrust across the power band. This sophisticated design helps support the engine works efficiently at cruising speeds, providing the vibration dampening and mechanical strength required for pushing small hulls through unpredictable coastal tidal flows while maintaining reliable marine motor systems standards.
Advanced EFI Induction
The Electronic Fuel Injection (EFI) system monitors atmospheric variables to provide the appropriate fuel induction ratio for peak performance. This technology is designed to support instant starting and prevents engine bogging, completely eliminating carburetor-related maintenance while providing rapid acceleration and clean combustion for professional long-range trips in performance-driven coastal saltwater maritime environments.
Tohatsu 5-Year Warranty
Every Tohatsu MFS30 is backed by a comprehensive 5-Year Limited Warranty for American boat owners. This high-pressure protection covers structural and mechanical defects, ensuring access to genuine replacement parts and certified technicians through a vast nationwide dealer network, reflecting a deep commitment to long-term maritime reliability and professional technical support.
Maintenance & Longevity
Routine oil changes for the 1.7-liter wet sump system are essential for preserving the engine’s tight mechanical tolerances in saltwater. Freshwater flushing after every excursion prevents internal salt deposits and maintains the cooling system health in corrosive maritime climates.Maintenance note: Follow the manufacturer’s service procedures and lubrication specifications for the engine and gearcase.
Product Specifications
Tohatsu MFS30CETL Outboard Specs
| Brand | Tohatsu Outboards |
|---|---|
| Country of Origin | Japan |
| Warranty Policy | 3 Years |
| Engine Architecture | Inline 3-Cylinder SOHC – High-displacement single overhead camshaft powerhead engineered to supply exceptionally smooth, low-vibration power at all operational speeds. |
| Displacement & Power | 500 cc – Generates 30 horsepower peaking at 5800 RPM with an operating full-throttle sweep scaling from 5500 to 6100 RPM. |
| Fuel Induction System | Electronic Fuel Injection – Computerized battery-free EFI loop optimizing air-to-fuel ratios for immediate cold starts, turnkey throttle response, and fuel-efficient performance. |
| Electrical & Charging | 17.5 Amp Alternator – Heavy-duty 210-watt charging circuitry engineered to simultaneously power auxiliary electronic accessories and deep-cycle fishfinders. |
| Shaft & Transom Layout | 20-inch Long Shaft – Long unit architecture configured specifically to match standard long-transom marine applications for stable tracking deep in the water column. |
| Control Mechanism | Remote Power Tilt – Combines convenient dash-mounted remote electric steering links with push-button hydraulic power trim-and-tilt mechanics. |
| Dry Weight Profile | 157 lbs – Robust 71 kg framework delivering heavy-duty trochoid oil pump components combined with an efficient 2.17:1 gear ratio layout. |
Payment Protection
Checkout will use the selected PayPal or Stripe payment method.
Free International Shipping
Free standard delivery to the United States, Canada and Australia.
Product Support
Ask for product and compatibility information before ordering.

Reviews
There are no reviews yet.