
VETUS M4.35 – Marine Diesel Engine 33 HP
Traditional wooden day-boats cruise quiet inland channels behind this VETUS M4.35 marine powerplant, which extracts 33 HP from a naturally aspirated 1.76L 4-cylinder block, routing 110 Amps charging across an SAE 5 housing at 401 lbs.
- 1.76L block maintains smooth 3000-RPM operation
- 110-Amp charging matrix powers navigation equipment
- Indirect heat exchanger stops engine scaling
- Naturally aspirated design eliminates turbo maintenance
- Weighs 401 lbs easing vessel installation
With 33 hp at 3000 rpm, the VETUS M4.35 is an inline four-cylinder marine diesel engine with 1.76 L displacement and naturally aspirated induction. Indirect fuel injection, a 22.0:1 compression ratio, and EN 590 diesel are specified for this configuration. Available 2:1, 2.4:1, and 3:1 drive ratios, plus Technodrive TMC60 or ZF15M transmission options, guide drivetrain selection for an inboard installation.
The engine has indirect heat-exchanger cooling and a 40 mm water-injected wet exhaust. Its forced-lubrication system lists 6.1 L oil capacity, while the cooling system lists 7 L coolant capacity. An SAE 5 flywheel housing, 12V 110-amp alternator, and 182 kg dry weight establish further checks for transmission matching, charging-system wiring, and engine-bed capacity.
Engine and Cooling Arrangement
This VETUS marine diesel engine uses a 78 x 92 mm bore-and-stroke layout with firing order 1-3-4-2. The naturally aspirated four-cylinder arrangement differs in output from the M4.45 while retaining the listed 1.76 L displacement, 3000 rpm rating, transmission family, cooling configuration, and SAE 5 flywheel housing.
A 7 L coolant capacity and 6.1 L oil capacity are specified for service planning. Mechanical and hydraulic steering compatibility is listed, but all steering, fuel, exhaust, cooling, electrical, and propulsion-system connections should follow the applicable VETUS installation documentation.
Why Choose the VETUS M4.35 Marine Diesel Engine
The M4.35 marine diesel engine is specified at 33 hp and 3000 rpm in a 1.76 L naturally aspirated inline four-cylinder package. Buyers can evaluate its 182 kg dry weight, SAE 5 flywheel housing, transmission options, three reduction ratios, 110-amp alternator, heat-exchanger cooling, and 40 mm wet exhaust alongside their vessel’s propulsion requirements. These defined specifications support a fitment-focused inboard engine comparison.
Warranty and Support
VETUS provides its 5 PLUS engine warranty program, consisting of 36 months of coverage for material and construction defects for eligible non-commercial pleasure-craft use, plus a subsequent 24-month limited coverage period for specified engine parts, subject to applicable operating-hour limits and warranty conditions. provides product-information support before purchase and assistance with order-related questions. Review warranty eligibility and current coverage details on before placing your order.
Before Ordering the VETUS M4.35 Marine Diesel Engine
Verify that your vessel requires the listed 33 hp at 3000 rpm output and supports the 1.76 L inline four-cylinder engine, SAE 5 flywheel housing, and 182 kg dry weight. You should choose the appropriate 2:1, 2.4:1, or 3:1 reduction ratio, confirm transmission compatibility, and plan fuel, cooling, wet-exhaust, steering, and 12V charging connections.
Product Specifications
VETUS M4.35 Full Specs
| Engine type | 4-Cylinder In-line (Mitsubishi Base) |
|---|---|
| Displacement | 1.76L (1758 cc) |
| Bore x stroke | 78 x 92 mm |
| Horsepower | 33 hp (24.3 kW) |
| Rated rpm | 3000 rpm |
| Aspiration | Naturally Aspirated |
| Compression ratio | 22.0:1 |
| Fuel system | Indirect Injection |
| Recommended fuel | Diesel (EN 590) |
| Ignition/Firing Order | Compression / 1-3-4-2 |
| Alternator | 12V, 110 Amp |
| Gear ratio/Drive | 2:1 / 2.4:1 / 3:1 |
| Transmission | Technodrive TMC60 / ZF15M |
| Dry weight | 182 kg (401 lbs) |
| Flywheel housing | SAE 5 |
| Steering | Mechanical / Hydraulic compatible |
| Coolant capacity | 7L |
| Exhaust system | Water-injected wet exhaust (40 mm) |
| Cooling system | Indirect cooling (Heat exchanger) |
| Lubrication | Forced lubrication |
| Oil capacity | 6.1L |
| Emissions rating | EU RCD II / BSO II / EPA Tier 3 |
Payment Protection
Checkout will use the selected PayPal or Stripe payment method.
Free International Shipping
Free standard delivery to the United States, Canada and Australia.
Product Support
Ask for product and compatibility information before ordering.
Reviews
There are no reviews yet.