Yanmar 4LV250 – Marine Diesel Engine 250 HP

With a verified 2.755-liter displacement producing 250 horsepower at 3800 RPM, the Yanmar 4LV250 delivers high continuous torque for modern fiberglass hulls. A sophisticated high-pressure common-rail injection system completely eliminates heavy mechanical idle clatter. Forced enclosed lubrication utilizes an 8.5-liter oil sump. This protects rapidly moving components across varying dynamic operational loads. The integrated turbocharger maximizes combustion oxygen density continuously. It maintains highly responsive throttle curves across mid-range operating speeds without requiring complex external air modification setups inside cramped engine compartments.

Internal block temperatures remain strictly regulated through a 9-liter closed freshwater circuit. Raw seawater never enters the internal cylinder waterways. This directly halts internal salt scaling and related metal corrosion over years of use. For electrical demands, an integrated 12V 130-amp alternator supplies high continuous charging current. It replenishes heavy house battery banks efficiently during operation. The native SAE 4 flywheel housing mounts effortlessly to KMH50A gears. A dry weight of just 334 kg minimizes the overall propulsion load affecting rear displacement geometry.

Engine Operation and Output

Operating entirely via electronic fuel mapping, this 2.755-liter Yanmar block provides excellent power density within a tight physical envelope. An enclosed forced lubrication circuit pumps oil through an 8.5-liter sump during demanding commercial runs. The high-pressure common-rail setup satisfies stringent EPA Tier 3, RCD II, and IMO II emissions limits. This happens by continuously adjusting injection timing based on precise helm load parameters. Throttle inputs communicate directly through the VC20 electronic control system. This completely bypasses traditional mechanical push-pull cable friction issues during demanding maneuvers.

Why Choose the Yanmar 4LV250 Inboard Diesel Engine

Commercial operators select the 4LV250 marine diesel engine for its compact 2.755-liter configuration and dependable 250 horsepower output. Electronic common-rail injection provides incredibly clean running conditions compared to older mechanically governed units. Featuring a massive 130-amp alternator, it easily runs large DC refrigeration compressors or navigation screens. The SAE 4 flywheel housing adapts immediately to KMH50A transmissions or KMH50V V-drive configurations. Total dry weight stays at 334 kg. This avoids drastically shifting your vessel’s center of gravity after final heavy-duty installation.

Warranty and Support

This 2.755-liter propulsion block carries a standard Limited Factory Warranty covering major internal assembly defects directly from Yanmar. provides essential product-information support before purchase and technical assistance with order-related questions. A thorough pre-shipment visual inspection confirms the crated engine item and all documented included components. Mechanics and vessel owners should examine warranty coverage scope concerning specific commercial versus recreational duty cycles. Please review the detailed warranty coverage and eligibility details directly on before placing your final heavy freight purchase order.

Before Ordering the Yanmar 4LV250 Inboard Diesel Engine

Calculate your engine room hatch opening carefully to confirm adequate fitting clearance for this 334 kg block. You must verify your intended transmission reduction gear ratio and existing shaft coupling layout. Check that your onboard DC wiring system safely supports a 12V 130-amp alternator charging circuit output. Next, confirm whether your helm station supports native VC20 electronic control inputs versus legacy mechanical push-pull cables. Ensure your existing diesel fuel filtration system matches the precise EN 590 flow demands for common-rail injection networks.