Skip to content
MARINE EQUIPMENT CATALOG & ORDER SUPPORT EXPERT SUPPORT

Phasor KK4-12.5 – 12.5kW Keel Cooled Diesel Generator 60Hz

Commercial fishing vessels operating in shallow silt-laden waters rely on a Phasor KK4-12.5 diesel generator, which runs a 1498cc 4-cylinder Kubota engine at 1800 RPM, delivering 12.5 kW across a keel-cooled closed circuit at 585 lbs.

  • 1800-RPM operating speed extends commercial engine longevity
  • Keel cooling circuit prevents shallow-water silt clogging
  • 12.5 kW output powers heavy deck machinery
  • Four-cylinder Kubota block provides low-vibration power generation
Availability In stock and available to order
Compare Ask a question
Category: Brand: SKU: KK4-12.5
Free standard shipping to eligible destinationsSecure checkout

The Phasor KK4-12.5 is a 12.5 kW, 60Hz marine diesel generator designed for vessels using 120V or 240V single-phase AC power. It uses a Kubota V1505-E four-cylinder diesel engine operating at 1,800 RPM and is configured for keel cooling, grid cooling, or compatible skin-cooling systems. The open-frame design is intended for installations where cooling is handled through the vessel hull circuit rather than by a seawater heat-exchanger arrangement.

The generator is supplied as an open-frame unit, with an optional sound enclosure available. It includes a remote safety-shutdown panel with oil-pressure, water-temperature, voltmeter, and hour-meter gauges. Correct installation requires a properly sized keel-cooling circuit, fuel system, exhaust, ventilation, starting battery, AC distribution, transfer switch, grounding, and circuit protection.

System Integration

This generator requires a keel-cooling or compatible hull-cooling circuit sized for the engine and generator heat load. It does not use a conventional raw-water heat exchanger as its primary cooling method. Confirm the vessel has an existing compatible keel cooler, grid cooler, or engineered skin-cooling solution before selecting this model.

The AC system requires a start battery, diesel fuel feed and return, exhaust system, ventilation, single-phase breaker panel, shore-power transfer switch or interlock, grounding and bonding, and correctly rated cables. Confirm the vessel’s 120V or 240V 60Hz requirement and include simultaneous loads, power factor, and motor-starting surge in capacity planning.

Before Ordering

Confirm required continuous and surge load within 12.5 kW, 120V or 240V single-phase 60Hz compatibility, an engineered keel-, grid-, or skin-cooling circuit, available 965 mm by 533 mm by 610 mm installation space, structural support for approximately 265 kg, diesel fuel layout, exhaust route, ventilation capacity, starting-battery circuit, AC distribution and transfer-switch design, grounding plan, optional sound-enclosure requirement, service access, and qualified marine-generator installation requirements before purchase.

Payment Protection

Checkout will use your selected payment method.

Free International Shipping

Free standard delivery to the United States, Canada and Australia.

Product Support

Ask for product and compatibility information before ordering.

Stay Ahead on the Water