Project 2000 Vertical Windlass, Capstand, Chrome, 5/16″, 3/8″, 7/16″, 1/2″ HT – 2300W – 24V

TheLofrans Project 2000combines a 2,300W 24V DC motor with a vertical gypsy and high-capacity capstan drum. The windlass has a stated maximum pull of 4,409 lbs and a 992 lbs continuous working-load rating. Its heavy chrome-plated cast bronze housing and AISI 316 stainless steel shaft form the listed deck and drive assembly.

The gypsy supports 5/16 in, 3/8 in, 7/16 in, or 1/2 in high-test chain. An independent friction brake clutch includes an emergency manual override, while the capstan drum provides separate line handling. The provided product data does not confirm an anchor, chain, rope, controls, contactor, or circuit breaker as included.

Which Boats This Windlass Fits

The Project 2000 vertical windlass is recommended for mega-yachts, catamarans, and commercial vessels from 59 to 82 ft. Its gypsy supports only the listed 5/16 in, 3/8 in, 7/16 in, or 1/2 in high-test chain options. Buyers should verify the exact gypsy selection and chain diameter because The available product details do not list rope compatibility.

the listed maximum pull is 4,409 lbs. The 992 lbs working-load rating provides the separate continuous hauling value. The continuous figure should guide regular retrieval assessment, while the maximum-pull figure remains a peak rating.

Care and Operating Notes

Rinse the housing, gypsy, capstan drum, chain, and exposed shaft with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the chain links, independent brake-clutch area, and deck hardware before operation. Inspect chain condition, clutch movement, emergency manual override access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The Project 2000 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm whether your chain is 5/16 in, 3/8 in, 7/16 in, or 1/2 in high-test chain before ordering. You should compare your vessel with the 59 to 82 ft application guide, measure deck thickness against the 1.6 to 2.8 in range, and account for the 210 mm above-deck height, 240 mm base diameter, and 106 lbs dry weight. Verify that your boat uses a 24V system with the required 100A circuit breaker. Confirm controls, contactor, circuit protection, anchor, chain, rope, and mounting hardware with the seller because the provided product data does not confirm them as included.