Lewmar VX1 Vertical Windlass with 8 mm Gypsy, 500 Watt Motor

TheLewmar VX1pairs a 500W 12V DC motor with a low-profile vertical gypsy-only arrangement for anchor rode retrieval. The windlass has a stated maximum pull of 882 lbs and a 220 lbs continuous working-load rating. A stainless steel top cap and high-strength composite base form the listed deck-unit construction.

The 8 mm gypsy accepts DIN 766 or ISO 4565 chain with 12 to 14 mm three-strand or 8-plait rope. A manual friction cone clutch controls the listed free-fall release function. The provided product data does not confirm an anchor, rode, switch, contactor, or circuit breaker as included.

Which Boats This Windlass Fits

The VX1 vertical windlass is recommended for power and sailboats from 20 to 30 ft. Its gypsy requires 8 mm DIN 766 or ISO 4565 chain paired with 12 to 14 mm three-strand or 8-plait rope. Both the chain standard and rope dimensions must match the confirmed configuration for the gypsy to manage the connected anchor rode.

the listed maximum pull is 882 lbs. The 220 lbs working-load rating is the separate continuous hauling figure. Buyers should use the continuous rating when assessing normal anchor retrieval requirements.

Care and Operating Notes

Rinse the top cap, gypsy, chain, and rope with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from chain links, the rope-to-chain transition, and clutch area before operation. Inspect the chain, rope, manual clutch movement, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The VX1 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode uses 8 mm DIN 766 or ISO 4565 chain with 12 to 14 mm three-strand or 8-plait rope. You should compare your boat with the 20 to 30 ft application guide, measure deck thickness against the 0.8 to 1.6 in range, and reserve space for the 115 mm-high deck unit and below-deck motor assembly. Verify that your 12V electrical system supports the listed 35A average draw and required 50A circuit breaker. Confirm package contents with the seller if you need an anchor, chain, rope, controls, or circuit-protection hardware.