Lewmar V3GD Vertical Windlass (Gypsy / Drum) – For Boats 40 – 50 Ft., Max Pull.: 1962 lbs.

A 1,000W 12V DC motor drives theLewmar V3GDthrough a vertical gypsy and warping drum configuration. The windlass has a stated maximum pull of 1,962 lbs and a 492 lbs continuous working-load rating. Precision-cast 316 stainless steel housing and a high-tensile shaft support the deck and drive assembly for 3/8 in ISO 4565 chain.

The gypsy accepts 14 to 16 mm three-strand rope with the specified 3/8 in chain. The Fast-Fit cone clutch controls the listed free-fall system, and the emergency manual override provides a separate control feature. The provided product data does not confirm an anchor, rode, switch, contactor, or circuit breaker as included.

Which Boats This Windlass Fits

The V3GD gypsy and drum windlass is recommended for cruisers, yachts, and workboats from 40 to 50 ft. Its gypsy requires 3/8 in ISO 4565 chain with 14 to 16 mm three-strand rope. Both rode components must match the confirmed sizes and named chain standard before they pass through the gypsy.

The 1,962 lbs maximum-pull figure states the peak rating. The 492 lbs working-load rating provides the separate continuous hauling value. Buyers should use the continuous rating when evaluating routine anchor retrieval demands.

Care and Operating Notes

Rinse the housing, gypsy, warping drum, chain, and rope with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from the chain links, rope transition, and cone-clutch area before operation. Inspect chain links, rope condition, free-fall clutch movement, emergency manual override access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The V3GD carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode uses 3/8 in ISO 4565 chain with 14 to 16 mm three-strand rope. You should compare your boat with the 40 to 50 ft application guide, measure deck thickness against the 1.0 to 2.0 in range, and allow for the 235 mm height, 182 mm base diameter, and 54 lbs dry weight. Verify that the 12V system supports the listed 100A average draw and required 110A circuit breaker. Confirm controls, circuit-protection hardware, anchor, chain, and rope with the seller because the provided product data does not confirm them as included.