Lewmar V3G Vertical Windlass (Gypsy) – For Boats 40 – 50 Ft., Max. Pull: 1962 lbs

TheLewmar V3Guses a 1,000W 12V DC motor in a low-profile vertical gypsy-only configuration for 3/8 in chain and rope anchor rode handling. The windlass has a stated maximum pull of 1,962 lbs and a 492 lbs continuous working-load rating. Its cast 316 stainless steel body and AISI 316 shaft form the deck and drive assembly.

The gypsy accepts 3/8 in ISO 4565 or DIN 766 chain with 9/16 to 5/8 in three-strand rope. The Fast-Fit free-fall system includes a built-in manual override. The provided product data does not confirm an anchor, rode, switch, contactor, or circuit breaker as included.

Which Boats This Windlass Fits

The V3G vertical windlass is recommended for power and sailboats from 40 to 50 ft. Its gypsy requires 3/8 in ISO 4565 or DIN 766 chain with 9/16 to 5/8 in three-strand rope. The chain standard, chain diameter, and rope diameter should all match the confirmed configuration before selecting the anchor rode.

the listed maximum pull is 1,962 lbs. The 492 lbs working-load rating provides the separate continuous hauling value. Buyers should use the continuous figure when reviewing normal retrieval requirements rather than treating maximum pull as an ongoing load rating.

Care and Operating Notes

Rinse the exposed housing, gypsy, chain, and rope with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the chain links, rope-to-chain transition, and free-fall release area before operation. Inspect the chain, rope, manual override access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The V3G carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode uses 3/8 in ISO 4565 or DIN 766 chain with 9/16 to 5/8 in three-strand rope. You should compare your boat with the 40 to 50 ft application guide, measure deck thickness against the 1.0 to 2.0 in range, and reserve room for the 110 mm above-deck height and 182 mm base diameter. Verify that your 12V electrical system supports the listed 100A average draw and required 110A circuit breaker. Confirm controls, circuit-protection hardware, anchor, chain, and rope with the seller because the provided product data does not confirm them as included.