Maxwell HRC-6 Free Fall 12v Horizontal Windlass for 1/4″ Chain & 1/2″ Line

TheMaxwell HRC-6uses a 400W 12V DC motor in a horizontal above-deck windlass with automatic free-fall. The windlass has a stated maximum pull of 770 lbs and a 265 lbs continuous working-load rating. Its pressure die-cast aluminum housing carries a hard-anodized finish.

The gypsy accepts 1/4 in DIN 766 chain with 1/2 in three-strand or 8-plait rope. A free-fall control clutch manages the listed release function, while the emergency manual release provides a separate control feature. The provided product data does not confirm an anchor, rode, switch, contactor, or circuit breaker as included.

Which Boats This Windlass Fits

The HRC-6 horizontal windlass is recommended for small cruisers and fishing boats from 20 to 35 ft. Its gypsy requires 1/4 in DIN 766 chain with 1/2 in three-strand or 8-plait rope. Both components must match the listed dimensions because the gypsy manages the connected chain and rope sections.

the listed maximum pull is 770 lbs. The 265 lbs working-load rating provides the separate continuous hauling value. Buyers should use the continuous rating when assessing regular anchor retrieval requirements.

Care and Operating Notes

Rinse the housing, gypsy, chain, and rope with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from the rope-to-chain transition and free-fall clutch area before operation. Inspect chain links, rope condition, manual-release access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The HRC-6 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode combines 1/4 in DIN 766 chain with 1/2 in three-strand or 8-plait rope. You should compare your boat with the 20 to 35 ft application guide and reserve space for the 145 mm by 245 mm housing. Verify that your boat uses a 12V system with the required 40A circuit breaker. Confirm controls, contactor, circuit protection, anchor, chain, rope, and mounting hardware with the seller because the provided product data does not confirm them as included.