Powerwinch Capstan 1000 Windlass

ThePowerwinch Capstan 1000uses a 1,000W 12V DC motor in a horizontal high-torque capstan with a warping-drum-only configuration. The unit has a stated maximum pull of 1,000 lbs and recovers line continuously at 40 ft/min. Its cast marine aluminum alloy housing forms the listed deck assembly.

The drum handles 1/2 to 5/8 in three-strand rope. A foot control switch, reversing solenoid, and 80A circuit breaker are included. The provided product data does not confirm an anchor, chain gypsy, rope, or additional controls as included.

Which Boats This Capstan Fits

The Capstan 1000 is recommended for cruisers, workboats, and commercial craft up to 40 ft. It accepts 1/2 to 5/8 in three-strand rope on the warping drum. Buyers should confirm rope diameter and construction before ordering because the product does not include a chain gypsy.

the listed maximum pull is 1,000 lbs. the listed data does not provide a continuous working-load rating, so the maximum-pull figure should not be used as a continuous operating value.

Care and Operating Notes

Rinse the housing, warping drum, rope, foot switch, and visible hardware with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the rope path and drum before operation. Inspect the rope, foot switch, reversing solenoid, circuit breaker, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for service instructions, approved replacement parts, and rope-handling procedures.

Warranty and Support

The Capstan 1000 carries a 2-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, rope, electrical accessories, shipping, or installation components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that you need a warping-drum capstan for 1/2 to 5/8 in three-strand rope rather than a chain gypsy windlass. You should compare your vessel with the up-to-40-ft application guide and verify mounting structure, line path, foot-switch location, solenoid placement, and 12V electrical arrangement. The foot switch, reversing solenoid, and 80A circuit breaker are included, but The available product details do not list an anchor, chain gypsy, rope, or additional controls.