Lewmar VX1 Vertical Windlass 6/7MM Gypsy 500 Watt

TheLewmar VX1uses a 500W 12V DC motor in a low-profile vertical gypsy-only configuration. The windlass has a stated maximum pull of 1,488 lbs and a 372 lbs continuous working-load rating. Its stainless steel top cap and high-strength composite base form the listed deck assembly.

The gypsy accepts 6 to 7 mm DIN 766 or ISO 4565 chain with 1/2 in three-strand or 8-plait rope. A manual friction clutch controls the listed controlled free-fall function. The provided product data does not confirm an anchor, rode, switch, contactor, or circuit breaker as included.

Which Boats This Windlass Fits

The VX1 vertical windlass is recommended for power and sailboats up to 36 ft. Its gypsy requires 6 to 7 mm DIN 766 or ISO 4565 chain with 1/2 in three-strand or 8-plait rope. The chain standard, chain diameter, and rope construction must match the listed configuration before selecting an anchor rode.

the listed maximum pull is 1,488 lbs. The 372 lbs working-load rating provides the separate continuous hauling value. Boat owners should use the continuous figure when assessing normal retrieval requirements.

Care and Operating Notes

Rinse the top cap, gypsy, chain, and rope with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from the rope-to-chain transition and manual-clutch area before operation. Inspect chain links, rope condition, clutch movement, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The VX1 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode combines 6 to 7 mm DIN 766 or ISO 4565 chain with 1/2 in three-strand or 8-plait rope. You should compare your boat with the up-to-36-ft application guide, measure deck thickness against the 0.8 to 2.0 in range, and reserve room for the 105 mm above-deck height and 152 mm base diameter. Verify that your boat uses a 12V system with the required 50A circuit breaker. Confirm controls, contactor, circuit protection, anchor, chain, and rope with the seller because the provided product data does not confirm them as included.