Muir Storm VR3500 1500W 3500lb Low-Profile Windlass

A 1,500W motor and a 50:1 right-angle worm gearbox define theMuir Storm VR3500low-profile vertical windlass. Available in 12V or 24V DC configurations, it has a stated maximum pull of 3,500 lbs and a continuous working-load rating of 875 lbs. The mirror-polished 316 stainless steel exterior forms the listed deck housing.

The gypsy handles either 3/8 in or 1/2 in chain with 5/8 to 3/4 in three-strand rope. An integrated manual-drop clutch and emergency braking handle provide the listed manual control functions. the listed data identifies a gypsy-only, low-profile deck configuration.

Which Boats This Windlass Fits

The Storm VR3500 low-profile windlass is recommended for offshore motor yachts and cruisers from 42 to 60 ft. Its gypsy must match the selected 3/8 in or 1/2 in chain and 5/8 to 3/4 in three-strand rope. Buyers should confirm both the voltage configuration and rode dimensions before ordering.

The 3,500 lbs figure represents the listed maximum pull. The 875 lbs working-load rating provides the separate continuous hauling value. These ratings serve different operating conditions and should not be used interchangeably.

Care and Operating Notes

Rinse the housing, gypsy, chain, rope, and emergency braking handle with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the rope-to-chain transition and manual-drop clutch before operation. Inspect chain links, rope condition, clutch movement, brake-handle access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for gearbox service, lubrication, disassembly, and approved replacement parts.

Warranty and Support

The Storm VR3500 carries a 3-year limited commercial and pleasure marine warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or installation components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm whether the boat uses the 12V or 24V configuration, then match the breaker requirement and stated current draw to that choice. You should select 3/8 in or 1/2 in chain with 5/8 to 3/4 in three-strand rope, compare the vessel with the 42 to 60 ft application guide, and allow for the 76 lbs unit mass. Consult manufacturer documentation for deck thickness, mounting dimensions, and below-deck clearance.