Muir Cougar HR1600 1000W 1200lb Yacht Anchor Windlass

A 1,000W motor and independent warping drum define theMuir Cougar HR1600horizontal windlass configuration. It is available in 12V or 24V DC versions, with a stated maximum pull of 1,200 lbs and a 300 lbs continuous working-load rating. Polished 316 stainless steel forms the listed exterior housing.

The gypsy accepts 1/4 in or 5/16 in chain with 1/2 to 9/16 in three-strand rope. A compact right-angle worm reduction layout transfers motor output. The fall-safe mechanical lock and socket clutch provide the listed anchor-holding and release functions.

Which Boats This Windlass Fits

The Cougar HR1600 windlass is recommended for cruising sailboats and cabin vessels from 28 to 42 ft. Its gypsy requires the selected 1/4 in or 5/16 in chain with 1/2 to 9/16 in three-strand rope. Buyers should match both rode dimensions and the chosen 12V or 24V configuration before ordering.

The 1,200 lbs figure is the listed maximum pull rating. The 300 lbs working-load rating provides the separate continuous hauling value. Boat owners should use the continuous figure when assessing normal retrieval requirements.

Care and Operating Notes

Rinse the housing, gypsy, warping drum, chain, rope, mechanical lock, and socket clutch with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the rope-to-chain transition before operation. Inspect chain links, rope condition, clutch action, lock movement, drum surface, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for gearbox service, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The Cougar HR1600 carries a 3-year limited commercial and pleasure marine warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm whether the boat uses the 12V or 24V configuration, then match the listed current draw and breaker requirement to that choice. You should select 1/4 in or 5/16 in chain with 1/2 to 9/16 in three-strand rope, compare your vessel with the 28 to 42 ft application guide, and allow for the 52.8 lbs unit mass. Consult manufacturer installation documentation for deck thickness, mounting dimensions, and clearance.