Maxwell RC10-10 Vertical 12v Windlass for 3/8″ Chain & 5/8″ Line

A low-profile vertical gypsy gives theMaxwell RC10-10a compact 12V rope-to-chain configuration without a capstan drum. The 1,200W motor has a stated maximum pull of 1,870 lbs and a 550 lbs continuous working-load rating. Its mirror-polished chrome-plated bronze body uses a stainless steel drive shaft.

The gypsy accepts 3/8 in short-link chain with 5/8 in three-strand or 8-plait rope. The patented Wave Design gypsy includes an integrated manual override. The low-profile housing keeps the listed deck unit at 89 mm above deck.

Which Boats This Windlass Fits

The RC10-10 low-profile windlass is recommended for power cruisers, yachts, and sailboats from 30 to 45 ft. Its gypsy requires 3/8 in short-link chain with 5/8 in three-strand or 8-plait rope. Buyers should match the chain link style, chain diameter, rope size, and rope construction before selecting anchor rode components.

The 1,870 lbs figure represents the listed maximum pull rating. The 550 lbs working-load rating provides the separate continuous hauling value. The continuous figure gives the relevant reference for routine anchor retrieval planning.

Care and Operating Notes

Rinse the housing, gypsy, chain, rope, and accessible shaft surfaces with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from the rope-to-chain transition and Wave Design gypsy before operation. Inspect chain links, rope condition, manual-override access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for gypsy service, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The RC10-10 carries a 3-year limited manufacturer warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that your anchor rode uses 3/8 in short-link chain with 5/8 in three-strand or 8-plait rope. You should compare your vessel with the 30 to 45 ft application guide, reserve space for the 89 mm above-deck height and 170 mm base diameter, and confirm the 12V system can use the required 135A breaker. Consult manufacturer installation documentation for deck thickness, mounting dimensions, and below-deck clearance.