Lofrans Project 1000 Windlass – Vertical, Low Profile, Chrome, 5/16″ HT/BBB – 1000W

TheLofrans Project 1000is a low-profile vertical gypsy-only windlass with a 1,000W 12V DC motor. It has a stated maximum pull of 1,984 lbs and a 298 lbs continuous working-load rating. The mirror-polished chrome-plated bronze housing and AISI 316 stainless steel shaft form the listed deck and drive assembly.

The gypsy accepts 5/16 in high-test or BBB short-link chain. A manual friction brake clutch system controls the listed braking and release function. The provided product data does not confirm an anchor, chain, rope, controls, contactor, or circuit breaker as included.

Which Boats This Windlass Fits

The Project 1000 vertical windlass is recommended for power and sailboats from 33 to 43 ft. Its gypsy supports 5/16 in high-test or BBB short-link chain. Buyers should confirm chain type and link style before ordering because The available product details do not list rope compatibility.

The 1,984 lbs figure represents the listed maximum pull rating. The 298 lbs working-load rating provides the separate continuous hauling value. The continuous figure should guide normal retrieval assessment.

Care and Operating Notes

Rinse the housing, gypsy, chain, and exposed shaft with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the chain links, friction-clutch area, and deck hardware before operation. Inspect chain condition, clutch movement, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The Project 1000 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode uses 5/16 in high-test or BBB short-link chain before ordering. You should compare your boat with the 33 to 43 ft application guide, measure deck thickness against the 1.0 to 2.0 in range, and reserve room for the 90 mm above-deck height and 150 mm base diameter. Verify that your boat uses a 12V system and can use the required 100A circuit breaker. Confirm controls, contactor, circuit protection, anchor, chain, rope, and mounting hardware with the seller because the provided product data does not confirm them as included.