Project 1500 Vertical Windlass, Capstand, Chrome, 5/16″ HT & BBB, 3/8″ HT – 1500W

A vertical gypsy and warping capstan drum define theLofrans Project 1500configuration. The 1,500W motor operates on 12V DC and has a stated maximum pull of 2,800 lbs with a 463 lbs continuous working-load rating. Mirror-polished chrome-plated bronze and an AISI 316 stainless steel shaft form the listed deck and drive assembly.

The gypsy supports 5/16 in HT or BBB chain and 3/8 in HT or BBB chain. A manual friction clutch brake includes an emergency manual override, while the capstan drum handles separate line work. The provided product data does not confirm an anchor, chain, rope, controls, contactor, or circuit breaker as included.

Which Boats This Windlass Fits

The Project 1500 gypsy and capstan windlass is recommended for motor cruisers and sailboats from 39 to 49 ft. Its gypsy supports only the listed 5/16 in and 3/8 in HT or BBB chain options. Buyers should confirm the exact chain diameter and grade because The available product details do not list rope compatibility.

The 2,800 lbs figure represents the listed maximum pull rating. The 463 lbs working-load rating provides the separate continuous hauling value. Boat owners should use the continuous rating when reviewing normal retrieval requirements.

Care and Operating Notes

Rinse the housing, gypsy, capstan drum, chain, and exposed shaft with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from chain links, the friction-clutch area, and deck hardware before operation. Inspect chain condition, clutch movement, emergency manual override access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The Project 1500 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm whether your chain is 5/16 in HT or BBB, or 3/8 in HT or BBB before ordering. You should compare your vessel with the 39 to 49 ft application guide, measure deck thickness against the 1.2 to 2.0 in range, and allow for the 195 mm above-deck height, 190 mm base diameter, and 59 lbs dry weight. Verify that your boat uses a 12V system with the required 125A circuit breaker. Confirm controls, contactor, circuit protection, anchor, chain, rope, and mounting hardware with the seller because the provided product data does not confirm them as included.