Lofrans Royal Anodized Horizontal Manual Windlass – 1/4″ HT, 5/16″ HT/BBB/PC, 3/8″ BBB/HT/PC

TheLofrans Royalis a horizontal deck-mounted manual windlass with a single-speed ratchet drive and hand lever. It has a stated maximum manual pull of 882 lbs and a 110 lbs continuous working-load rating. The unit uses a marine anodized aluminum body with an AISI 316 stainless steel drive shaft.

The gypsy supports 1/4 in HT chain, 5/16 in HT, BBB, or PC chain, and 3/8 in BBB, HT, or PC chain. A manual friction clutch controls the listed free-fall release. This mechanical windlass requires no electrical power, and the provided product data does not confirm a hand lever, anchor, chain, rope, or mounting hardware as included.

Which Boats This Windlass Fits

The Royal manual windlass is recommended for cruisers, classic boats, and bluewater sailboats from 26 to 39 ft. Its gypsy supports only the listed high-test, BBB, and PC chain combinations. Buyers should identify the exact chain diameter and grade before ordering because The available product details do not list rope compatibility.

The 882 lbs maximum manual pull represents the listed peak pull rating. The 110 lbs working-load rating provides the separate continuous hauling figure. These values should not be treated as the same operating limit.

Care and Operating Notes

Rinse the housing, gypsy, chain, drive shaft, and friction-clutch area with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the chain links, ratchet mechanism, and deck hardware before operation. Inspect chain condition, hand-lever engagement, clutch movement, visible fasteners, and mounting points before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The Royal carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, shipping, mounting hardware, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm whether your chain is 1/4 in HT, 5/16 in HT, BBB, or PC, or 3/8 in BBB, HT, or PC before ordering. You should compare your boat with the 26 to 39 ft application guide, reserve space for the 192 mm by 222 mm housing, and account for the 22 lbs dry weight. Verify the mounting structure, hand-lever clearance, and clutch access before installation. Confirm the hand lever, anchor, chain, rope, and mounting hardware with the seller because the provided product data does not confirm them as included.