Maxwell HRC10-10 Free Fall 12v Horizontal Windlass for 3/8″ Chain & 5/8″ Line

TheMaxwell HRC10-10combines a 1,200W 12V DC motor with a horizontal above-deck heavy-duty free-fall configuration. The windlass has a stated maximum pull of 1,870 lbs and a 550 lbs continuous working-load rating. Its anodized alloy body includes cast 316 stainless steel components.

The gypsy accepts 3/8 in short-link chain with 5/8 in three-strand or 8-plait rope. The patented Wave Design free-fall control clutch includes an emergency release. The provided product data does not confirm an anchor, rode, switch, contactor, or circuit breaker as included.

Which Boats This Windlass Fits

The HRC10-10 horizontal windlass is recommended for coastal cruisers and offshore yachts from 30 to 45 ft. Its gypsy requires 3/8 in short-link chain paired with 5/8 in three-strand or 8-plait rope. Both the chain link type and rope size must match the listed configuration for the gypsy to manage the anchor rode.

The 1,870 lbs figure represents the listed maximum pull rating. The 550 lbs working-load rating provides the separate continuous hauling value. Buyers should use the working-load figure when reviewing normal retrieval requirements.

Care and Operating Notes

Rinse the housing, gypsy, chain, and rope with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from the rope-to-chain transition and free-fall clutch area before operation. Inspect chain links, rope condition, clutch movement, emergency-release access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The HRC10-10 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode uses 3/8 in short-link chain with 5/8 in three-strand or 8-plait rope. You should compare your boat with the 30 to 45 ft application guide and reserve space for the 215 mm by 310 mm housing. Verify that your boat uses a 12V system with the required 135A circuit breaker. Confirm controls, contactor, circuit protection, anchor, chain, rope, and mounting hardware with the seller because the provided product data does not confirm them as included.