Octopus Type S Straight Shaft f/Mounting Behind the Dash f/Mechanical Drive Systems – Includes 90° Bezel Kit

Tight center console dashboards fit an Octopus Type S autopilot controller via an included 90-degree bezel, delivering 150 lbs of mechanical cable thrust from a 12V reversing gear motor across a 210mm depth at 8.6 lbs.

90-degree bezel fits compact dashboard helms
150-lb thrust actuates mechanical steering cables
Reversing gear motor provides responsive steering
12V system draws 5A during cruising
Quick-connect socket speeds cable helm installation

$492.80

Availability In stock and available to order

Buy Now

Bulk order support Request for Quotation

Browse compare Ask a question

Category: Marine Autopilots Brand: Octopus SKU: OCT-TYPE-S-STR

Free standard shipping to eligible destinationsSecure checkout

The Octopus Type S Straight Shaft Mechanical Drive with 90° Bezel Kit is a compact behind-dash mechanical autopilot drive for compatible standard push-pull steering cables. Its straight-shaft design is suited to helm consoles where an angled or tilt steering shaft is not required. The package includes a 90-degree bezel kit and mounting hardware for the stated flush-mount mechanical-drive configuration.

The 12V reversing gear motor delivers up to 150 lb of cable thrust, typically draws 3A to 5A, and can reach 12A under maximum load. It requires about 210 mm of behind-dash depth and weighs 3.9 kg, or 8.6 lb. This component is a steering drive only and requires a compatible autopilot computer, heading sensor, control interface, power system, and correctly installed mechanical steering cable.

Before Ordering

Confirm a compatible straight-shaft mechanical helm, standard push-pull steering cable, 210 mm behind-dash depth, required 90-degree bezel orientation, matching autopilot processor, 12V supply, 12A circuit capacity, dashboard structural support, cable bend radius, full manual steering operation, and complete autopilot-system components before purchase.

Product Specifications

Octopus Type S Straight Shaft f/Mounting Behind the Dash f/Mechanical Drive Systems - Includes 90° Bezel Kit

Drive Type	Mechanical Rotary Straight Drive
Pump/Ram Capacity	Direct Shaft Mechanical Helm
Flow Rate / Speed	Constant Ratio Steering
Max Pressure	150 lbs Maximum Cable Thrust
Cylinder Compatibility	Standard Mechanical Steering Cables
Operating Voltage	12V DC System
Peak Current Draw	12 Amps Maximum
Average Power Draw	3A - 5A Typical Use
Motor Type	Integrated Reversing Gear Motor
Computer Compatibility	Universal (Simrad, Garmin, Raymarine)
Port Size / Thread	Standard Quick-Connect Cable Port
Drive Connection	Straight Steering Shaft Interface
Rotation/Stroke Direction	Reversible Rotary Cable Motion
Mounting Type	Behind-Dash Flush Mount
Housing Material	Reinforced Steel & Industrial ABS
Waterproof Rating	Splash-Protected Interior Housing
Operating Temperature	Standard Marine Environment Grade
Length (Overall)	210 mm Drive Depth
Width/Diameter	Standard Steering Helm Frame
Weight	3.9 kg (8.6 lbs)
Included Accessories	90° Bezel Kit, Mounting Hardware
Key Mechanical Feature	Compact straight shaft for tight consoles