
Webasto C32 T C-Series 32000 BTU Marine Chiller
The Webasto C32 T delivers 32,000 BTU marine chiller capacity for centralized cooling across medium-sized vessel climate zones.
- 32,000 BTU output suits medium systems.
- C32 T identifies the configuration.
- Marine chiller serves centralized cooling.
- Capacity supports multiple interior zones.
- Compatible distribution completes installation.
Boats with three independent zones needing central chiller cooling in the low-to-mid capacity range find a solid fit in the Webasto C32, delivering 32,000 BTU/h with the flexibility of a 2-stage compressor configuration. This compact central chiller three zones system bridges the gap between Webasto’s smallest entry chillers and its mid-range options.
The 2-stage setup at this capacity gives a real efficiency advantage over a single fixed compressor — running one stage during lighter cooling loads and both during peak demand, rather than cycling a single large compressor on and off across the full range.
Why Choose the Webasto C32
This unit carries Webasto’s standard 2-year warranty. Unlike several other listings in this lineup, this product page’s naming is internally consistent, which simplifies confirming you’re ordering the correct part number.
What to Know Before Installing
- This chiller requires separately specified air handlers (Webasto’s A-Series) distributed to each independent zone
- The 2 x 16A max circuit breaker spec reflects the 2-stage compressor configuration — plan your electrical panel accordingly
- Ships via freight given the 169 lb weight; commercial delivery address required
- Professional installation and electrical planning is strongly recommended
Product Specifications
Product Specifications
| Brand | Webasto Marine |
|---|---|
| Full Model SKU/Code | BlueCool C32 T (C-Series Twin) |
| Country of Origin | Germany |
| AC System Type | Central Multi-Stage Chilled Water Marine Air Conditioning System |
| Cooling Capacity | 32,000 BTU/h (9.4 kW / 2.6 Tons) |
| Heating Capacity | 32,000 BTU/h (Reverse Cycle Heat Pump Mode via Staged Twin Compressors) |
| Refrigerant Type | R-410A Pre-Charged Eco-Friendly Gas |
| Compressor Technology | Dual Hermetic Rotary Compressors (2 Independent Staged Processing Circuits) |
| Operating Voltage / Frequency | 230 Volts AC / 50 or 60 Hz Single Phase Base Rail |
| Full Load Amps / Running Current | Cooling Duty: 8.4 Amps / Heating Duty: 9.6 Amps (Aggregated Active Total at 230V) |
| Locked Rotor Amps / Starting Current | 18.0 Amps LRA (Per Compressor Stage, sequentially managed via Electronic Time-Delay) |
| Recommended Circuit Breaker Rating | 15 Amps Heavy-Duty Marine Breaker |
| Required Sea Water Flow Rate | 500 GPH / 31.5 Liters per minute minimum condenser loop |
| Sea Water Inlet/Outlet Size | 3/4" (19mm) Inner Diameter Hose Barb Connections |
| Chilled Water Loop Connections | 3/4" (19mm) Threaded Quick-Connect Internal Interface Ports |
| Condenser Coil Material | Corrosion-Resistant Cupronickel (CuNi 90/10) Coaxial Heat Exchanger Tube |
| Control Interface Connectivity | BlueCool MyTouch Digital Touch Controller & NMEA 2000 Data Bus Integration Capable |
| Dimensions (L x W x H) | 58.5 cm x 37.0 cm x 41.5 cm / 23.0" x 14.6" x 16.3" |
| Dry Weight | 54.0 kg / 119.0 lbs (Premium epoxy-coated structural safety frame tray assembly) |
| Application | Centralized water chilling for mid-size motor yachts, family sports cruisers, and multihull vessels seeking quiet multi-cabin cooling loops (36-48 ft boat lengths) |
Payment Protection
Checkout will use the selected PayPal or Stripe payment method.
Free International Shipping
Free standard delivery to the United States, Canada and Australia.
Product Support
Ask for product and compatibility information before ordering.
Reviews
There are no reviews yet.