Raymarine Type 1 Linear Drive – 12V

Steering quadrants on sailing hulls up to 24,000 lbs gain reliable rudder power from this Raymarine Type 1 linear drive, delivering 650 lbs of peak thrust across a 12.0-inch stroke length in 10 seconds at 12V.

650-lb peak thrust actuates rudder quadrants
12-inch stroke completes traversal in 10 seconds
Handles cruising sailboats up to 24000 lbs
Electromechanical clutch provides drag-free hand steering
Hard-anodized alloy housing resists wet bilges

$1,231.12

Availability In stock and available to order

Buy Now

Bulk order support Request for Quotation

Compare Ask a question

Category: Marine Autopilots Brand: Raymarine SKU: RAY-T1-LIN-12V

Free standard shipping to eligible destinationsSecure checkout

Install the Raymarine Type 1 Linear Drive 12V as an electromechanical steering actuator for compatible mechanically steered sailboats. It produces up to 650 lb, or 295 kg, peak thrust through a 300 mm, or 12-inch, linear stroke. The drive is intended for sailboats up to 24,000 lb, or 11,000 kg, and connects to a suitable steering quadrant or tiller arm through a bolted linear-drive linkage.

The 12V permanent-magnet motor draws approximately 2A to 5A during typical operation and up to 15A under peak load. The 8.5 kg drive uses a hard-anodized alloy body and steel rod, with IPX6 splash protection. It is a drive-only component and needs a compatible course computer, control head, heading sensor, rudder-feedback arrangement where required, and complete installation hardware.

Before Ordering

Confirm a mechanically steered sailboat at or below 24,000 lb, a compatible course computer, 300 mm stroke clearance, 650 lb thrust compatibility, adequate mounting structure, full rudder travel, 12V supply, 15A peak circuit capacity, properly sized wiring, and an IPX6-appropriate mounting location before purchase.

Product Specifications