Lowrance Outboard Pilot Cable Steer Pack

Converting traditional mechanical cable helms into hands-free navigation, this Lowrance Outboard Pilot course computer uses a behind-dash Helm-1 drive and NAC-1 processor to guide boats up to 30 feet via Point-1 heading telemetry.

Helm-1 cable drive replaces manual steering effort
Point-1 sensor maintains 1-degree heading accuracy
SmartSteer interface integrates Lowrance HDS touchscreens
NMEA 2000 bus enables fast plug-and-play setup

$922.50

Availability In stock and available to order

Buy Now

Bulk order support Request for Quotation

Compare Ask a question

Category: Marine Autopilots Brand: Lowrance SKU: LOW-OUTB-CABLE

Free standard shipping to eligible destinationsSecure checkout

Convert a compatible mechanical cable-steering outboard system into an autopilot installation with the Lowrance Outboard Pilot Cable Steer Pack. The pack combines a NAC-1 autopilot computer, Helm-1 cable drive, Point-1 GPS and heading sensor, NMEA 2000 kit, and Auto and Standby button. It is specified for Morse and Teleflex cable steering on vessels up to 30 ft and uses a 12V DC supply.

The Helm-1 drive mounts behind the dash, while the NAC-1 mounts on a bulkhead. Rudder feedback is integrated into the Helm-1 drive, eliminating a separate feedback component for the specified system configuration. The pack integrates with Lowrance HDS Live, HDS Carbon, and Elite FS displays through NMEA 2000. Confirm cable-steering compatibility, behind-dash clearance, power supply, display compatibility, and control-cable routing before purchase.

Why Choose the Lowrance Outboard Pilot Cable Steer Pack

The Lowrance Outboard Pilot Cable Steer Pack combines the NAC-1 computer, Helm-1 cable drive, Point-1 GPS and heading sensor, integrated rudder feedback, and NMEA 2000 kit. Buyers can compare its Morse and Teleflex cable-steering compatibility, up-to-30-foot vessel specification, 12V supply, 8A peak draw, behind-dash drive mounting, MFD-based calibration, and HDS Live, Carbon, or Elite FS integration with other outboard autopilot systems.

Warranty and Support

Lowrance warranty terms vary by product and region, and the supplied specifications do not provide a named warranty period for this autopilot pack. can help you review cable-steering compatibility, vessel length, Helm-1 and NAC-1 mounting locations, 12V power needs, Point-1 sensor placement, NMEA 2000 requirements, and display compatibility before purchase. Review the applicable Lowrance warranty coverage and documented package contents before ordering.

Before Ordering the Lowrance Outboard Pilot Cable Steer Pack

Confirm that your vessel uses compatible Morse or Teleflex cable steering, is within the specified 30 ft vessel range, and has a compatible Lowrance HDS Live, HDS Carbon, or Elite FS display. You should verify Helm-1 behind-dash clearance, NAC-1 bulkhead mounting space, Point-1 sensor position, NMEA 2000 backbone capacity, 12V circuit capacity, steering-cable routing, and required automatic-calibration setup before purchase.

Product Specifications

Lowrance Outboard Pilot Cable Steer Pack

Display Type	N/A (Controlled via HDS/Elite Display)
Control Unit	NAC-1 Autopilot Computer
Drive Unit Compatibility	Helm-1 Cable Drive (Included)
Max Boat Displacement	Vessels up to 30ft
Steering Type	Mechanical Cable Steering (Morse/Teleflex)
Heading Sensor	Point-1 GPS/Heading Sensor
Operating Voltage	12V DC
Power Consumption (Idle)	0.1A
Power Consumption (Typical)	8A (NAC-1 Peak)
Networking (NMEA 2000/0183)	NMEA 2000 Certified
Wireless Capabilities	No
Integration (MFD Support)	Lowrance HDS Live/Carbon/Elite FS
Sea State Optimization	SmartSteer Interface
Course Accuracy	+/- 1 degree
Rudder Reference Support	Included in Helm-1 Drive
Commissioning Method	Automatic Calibration via MFD
Waterproof Rating	IPX7
Operating Temperature	-15°C to 55°C
Mounting Options	Behind-dash (Helm-1) / Bulkhead (NAC-1)
Dimensions (Control Head)	N/A
In-box Contents	NAC-1, Helm-1, Point-1, N2K Kit, Auto/Stby Button
Key Features	Converts manual cable steering to autopilot