Lewmar CPX2 12V Gypsy Drum Anchor Windlass Winch

A vertical gypsy and warping drum give theLewmar CPX2separate anchor-rode and line-handling functions. The 700W 12V DC motor has a stated maximum pull of 1,433 lbs and a 358 lbs continuous working-load rating. Its hard-anodized aluminum deck casting includes 316 stainless steel trim.

The gypsy accepts 5/16 in DIN 766 or ISO 4565 chain with 9/16 in three-strand nylon rope. A compact cycloidal dual-stage gearbox transfers motor output. The fall-safe anchor lock lever and socket clutch provide the listed locking and release functions.

Which Boats This Windlass Fits

The CPX2 gypsy and drum windlass is recommended for mid-size sailboats and cabin cruisers from 32 to 42 ft. Its gypsy requires 5/16 in DIN 766 or ISO 4565 chain with 9/16 in three-strand nylon rope. Both components must match the listed rode specification because the gypsy handles the joined chain and rope sections.

The 1,433 lbs figure represents the listed maximum pull rating. The 358 lbs working-load rating provides the separate continuous hauling value. Boat owners should use the continuous figure when evaluating normal retrieval requirements.

Care and Operating Notes

Rinse the deck casting, gypsy, warping drum, chain, and rope with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from the rope-to-chain transition, anchor lock, and socket clutch before operation. Inspect chain links, rope condition, lock-lever movement, clutch action, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for gearbox service, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The CPX2 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or installation components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode uses 5/16 in DIN 766 or ISO 4565 chain with 9/16 in three-strand nylon rope. You should compare your vessel with the 32 to 42 ft application guide, allow for the 40.7 lbs unit mass, and verify mounting details through manufacturer documentation. Confirm that your 12V system supports the listed 35A working-load draw and required 70A circuit breaker.