Lofrans Project 1500 Vertical Windlass, Low Profile, Chrome, 5/16″ HT & BBB, 3/8″ HT – 1500W

TheLofrans Project 1500combines a 1,500W 12V DC motor with a low-profile vertical gypsy-only arrangement. The windlass has a stated maximum pull of 2,800 lbs and a 463 lbs continuous working-load rating. Its mirror-polished chrome-plated bronze housing and AISI 316 stainless steel shaft form the listed deck and drive assembly.

The gypsy supports 5/16 in HT or BBB chain and 3/8 in HT or BBB chain. A manual friction clutch brake controls the listed release function. The provided product data does not confirm an anchor, chain, rope, controls, contactor, or circuit breaker as included.

Which Boats This Windlass Fits

The Project 1500 vertical windlass is recommended for motor cruisers and sailboats from 39 to 49 ft. Its gypsy supports 5/16 in or 3/8 in HT or BBB chain. Buyers should identify the exact chain diameter and grade before ordering because The available product details do not list rope compatibility.

the listed maximum pull is 2,800 lbs. The 463 lbs working-load rating provides the separate continuous hauling value. The continuous figure should guide regular retrieval assessment, while the maximum-pull figure remains a peak rating.

Care and Operating Notes

Rinse the housing, gypsy, chain, and exposed shaft with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from chain links, the friction-clutch area, and deck hardware before operation. Inspect chain condition, clutch movement, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The Project 1500 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm whether your chain is 5/16 in HT or BBB, or 3/8 in HT or BBB before ordering. You should compare your vessel with the 39 to 49 ft application guide, measure deck thickness against the 1.2 to 2.0 in range, and reserve room for the 110 mm above-deck height and 190 mm base diameter. Verify that your boat uses a 12V system and can use the required 125A circuit breaker. Confirm controls, contactor, circuit protection, anchor, chain, rope, and mounting hardware with the seller because the provided product data does not confirm them as included.