Maxwell HRC10-8 Free Fall 12v Horizontal Windlass for 5/16″ Chain & 9/16″ Line

TheMaxwell HRC10-8uses a 1,000W 12V DC motor in a horizontal above-deck windlass with an automatic free-fall system. The windlass has a stated maximum pull of 1,540 lbs and a 550 lbs continuous working-load rating. Its anodized alloy housing uses stainless steel fasteners.

The gypsy accepts 5/16 in short-link chain with 9/16 to 5/8 in three-strand or 8-plait rope. The patented Wave Design free-fall control clutch includes manual release. The provided product data does not confirm an anchor, rode, switch, contactor, or circuit breaker as included.

Which Boats This Windlass Fits

The HRC10-8 horizontal windlass is recommended for mid-size powerboats and sailboats from 30 to 45 ft. Its gypsy requires 5/16 in short-link chain with 9/16 to 5/8 in three-strand or 8-plait rope. The chain link type and rope diameter must match the listed configuration for the gypsy to manage the connected rode.

the listed maximum pull is 1,540 lbs. The 550 lbs working-load rating provides the separate continuous hauling value. Boat owners should consider the continuous rating when assessing normal retrieval loads.

Care and Operating Notes

Rinse the housing, gypsy, chain, and rope with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the rope-to-chain transition and Wave Design clutch area before operation. Inspect chain links, rope condition, clutch movement, manual-release access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The HRC10-8 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode uses 5/16 in short-link chain with 9/16 to 5/8 in three-strand or 8-plait rope. You should compare your boat with the 30 to 45 ft application guide and reserve space for the 215 mm by 310 mm housing. Verify that your boat uses a 12V system with the required 100A circuit breaker. Confirm controls, contactor, circuit protection, anchor, chain, rope, and mounting hardware with the seller because the provided product data does not confirm them as included.