Maxwell RC10/8 12V AUTOMATIC ROPE CHAIN WINDLASS 5/16″ CHAIN TO 5/8″ ROPE

A 1,000W 12V motor in a low-profile vertical deck unit defines theMaxwell RC10-8rope-to-chain windlass. The windlass has a stated maximum pull of 1,540 lbs and a 550 lbs continuous working-load rating. Its heavy chrome-plated bronze deck unit uses a stainless steel shaft within the listed assembly.

The gypsy accepts 5/16 in short-link chain with 9/16 to 5/8 in three-strand or 8-plait rope. The patented Wave Design gypsy includes an integrated manual override. This low-profile configuration handles the listed anchor rode without a capstan drum.

Which Boats This Windlass Fits

The RC10-8 vertical windlass is recommended for coastal cruisers, sailboats, and sportfishers from 30 to 45 ft. Its gypsy requires 5/16 in short-link chain with 9/16 to 5/8 in three-strand or 8-plait rope. Buyers should match chain link style, chain diameter, rope size, and rope construction before selecting anchor rode components.

The 1,540 lbs figure represents the listed maximum pull rating. The 550 lbs working-load rating provides the separate continuous hauling value. The continuous figure gives the relevant reference for normal anchor retrieval planning.

Care and Operating Notes

Rinse the housing, gypsy, chain, rope, and accessible shaft surfaces with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from the rope-to-chain transition and gypsy before operation. Inspect chain links, rope condition, manual-override access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for gypsy service, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The RC10-8 carries a 3-year limited manufacturer warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that your anchor rode uses 5/16 in short-link chain with 9/16 to 5/8 in three-strand or 8-plait rope. You should compare your vessel with the 30 to 45 ft application guide, reserve space for the 89 mm above-deck height and 170 mm base diameter, and confirm the 12V system can use the required 100A breaker. Consult manufacturer installation documentation for deck thickness, mounting dimensions, and below-deck clearance.