Maxwell RC8-6 Vertical 12v Windlass for 1/4″ Chain & 1/2″ Line

A 600W 12V motor in a low-profile vertical deck unit defines theMaxwell RC8-6rope-to-chain windlass. The windlass has a stated maximum pull of 770 lbs and a 265 lbs continuous working-load rating. Its heavy chrome-plated bronze body and stainless steel drive shaft form the listed deck assembly.

The gypsy accepts 1/4 in short-link chain with 1/2 in three-strand or 8-plait rope. A patented Wave Design free-fall clutch controls the listed release function, while the manual emergency release provides an alternate control feature.

Which Boats This Windlass Fits

The RC8-6 vertical windlass is recommended for cruisers and runabouts from 20 to 35 ft. Its gypsy requires 1/4 in short-link chain with 1/2 in three-strand or 8-plait rope. Buyers should match chain link style, chain diameter, rope diameter, and rope construction before selecting anchor rode components.

The 770 lbs figure represents the listed maximum pull rating. The 265 lbs working-load rating provides the separate continuous hauling value. The continuous figure gives the relevant reference for normal anchor retrieval planning.

Care and Operating Notes

Rinse the housing, gypsy, chain, rope, and accessible drive-shaft surfaces with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from the rope-to-chain transition and Wave Design clutch before operation. Inspect chain links, rope condition, clutch movement, manual-release access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for clutch service, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The RC8-6 carries a 3-year limited manufacturer warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that your anchor rode uses 1/4 in short-link chain with 1/2 in three-strand or 8-plait rope. You should compare your vessel with the 20 to 35 ft application guide, reserve space for the 83 mm above-deck height and 156 mm base diameter, and confirm the 12V system can use the required 70A breaker. Consult manufacturer installation documentation for deck thickness, mounting dimensions, and below-deck clearance.