Quick Genius GP2 500 Anchor Windlass Package Unit

At 250W, theQuick Genius GP2 500combines a 12V DC motor with a compact horizontal on-deck gypsy-only configuration. The windlass has a stated maximum pull of 1,212 lbs and a separate 374 lbs continuous working-load rating. Its anodized marine aluminum body uses high-impact composite components.

The gypsy accepts 1/4 in DIN 766 or ISO 4565 chain with 1/2 in three-strand nylon rope. An epicyclic planetary gearbox transfers motor output, while the integrated pressure-lever clutch provides manual emergency drop. The available product details do not list a warping drum within this compact gypsy-only package.

Which Boats This Windlass Fits

The Genius GP2 500 windlass is recommended for small cruisers, sailboats, and runabouts from 20 to 30 ft. Its gypsy requires both the listed 1/4 in DIN 766 or ISO 4565 chain and 1/2 in three-strand nylon rope. Buyers should match the chain standard, diameter, and rope size together before selecting the anchor rode.

The 1,212 lbs figure is the listed maximum pull rating. The 374 lbs working-load rating identifies the separate continuous hauling value. Boat owners should use the continuous figure when assessing normal retrieval requirements.

Care and Operating Notes

Rinse the housing, gypsy, chain, and rope with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the rope-to-chain transition and pressure-lever clutch before operation. Inspect chain links, rope condition, clutch movement, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for gearbox service, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The Genius GP2 500 carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or installation components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode uses 1/4 in DIN 766 or ISO 4565 chain with 1/2 in three-strand nylon rope. You should compare your vessel with the 20 to 30 ft application guide, allow for the 18.1 lbs unit mass, and verify mounting details through manufacturer documentation. Confirm that your 12V system supports the listed 24A working-load draw and required 40A circuit breaker.